Showing 1–15 of 21 resultsSorted by price: high to low
TANGO I SWING HEAD
The TANGO is a convenient third axis: whatever fluid or geared head is chosen, the panoramic movement remains horizontal and the tilt stays vertical.
The maneuvering of the fluid or gear head remains unchanged. The twin support and racks add further advantages to TANGO such as silence, steadiness and flexibility when moving your camera, and a locking position range of 90° degrees.
Weight:
10 pounds
100mm Hi-Hat
The cast iron 100mm Hi-Hat works with any fluid head that has a 100mm ball base.
The hi hat comes mounted on a hi hat board that has cut corners (octagon shape) in order to fit into tighter spaces
Each leg has a 1/4″ hole for easy mounting to wood or metal plates.
Weighs
2.05 pounds.
150mm Hi-Hat
The Cast Iron Ball/Claw Hi-Hat works with all professional fluid heads with a 150mm ball mount.
The 3 legs have holes for mounting it to a wood or metal plate. The hi hat comes mounted on a hi hat board that has cut corners (octagon shape) in order to fit into tighter spaces.
Weighs
3.25 pounds.
Manfrotto Hi Hat
The Manfrotto 529 Hi Hat with 100mm Bowl facilitates shots from the very low positions. The feet are rubber padded to protect delicate surfaces and have a hole so that it can be screwed down to a ladder, apple box, or sheet of plywood.
Material
Aluminum
Load Capacity
44 lb (20 kg)
Maximum Height
7.68″ (19.5 cm)
Minimum Height
5.7″ (14.5 cm)
Center Column
None
Leg Sections
1
Leg Cross Section
Round
Leg Tube Diameters
19 mm
Head Fixing
100 mm
Weight
5.95 lb (2.7 kg)
Mitchell Lo-Hat on Octagon Board
This mount is constructed from high-strength, heat-treated aluminum and can be used as a Mitchell interface when constructing specialized rigs and setups. This Low Hat Mount comes with 3 Mitchell keys for easier set-up, and all three legs have mounting holes for securing it to a mounting board.
Compatibility
Mitchell Base Heads 2065, 2575D, 120EX
Mitchell Hi-Hat on Octagon Board
This high hat features three keyways making it quicker to align the head’s locating key to the high hat. In addition if one of the high hat’s keyways becomes damaged, you can still mount your tripod head using one of the other two keyways and continue shooting. The pre-drilled mounting holes in the high hat’s support feet make it easy to attach the high hat to structures for long-term projects.
Head Attachment Fitting
Standard Mitchell
3 x Keyways
Material of Construction Aluminum with a powder coated finish
Mountable
Pre-drilled Holes
3 x 3/8″ non tapped
One hole in each of the high hats support feet
Height
4.5 ” (11.4 cm)
Ceco Geared Wedge
The Geared wedge allows for extra tilt function, camera quick release ability, and balance adjustment for long lenses or off center configurations.
Weight:
12 lb
Candrevaplate RA
The CANDREVAplate RA solves the problem of mounting the camera on its side and still being able to pan and tilt the camera normally.
The CANDREVAplate RA snaps into the O’Connor 2575 and allows the camera to be rigidly held on it’s side for those shots looking to utilize the best resolution of the camera’s sensor in the vertical orientation.
- Heavy-Duty L-Shaped Plate
- Mount Your Camera Vertically
- Compatible with OConnor 2575 Head
- Multiple Mounting Holes, Bubble Level
- Includes 2 Quick Release Plates
Compatibility
OConnor 2575 Head
Ronford-Baker RBQ
Multiple Heads with Euro Plate Receiver
Physical
Mounting:
9 x Pass-Through Holes
1 x OConnor 2575 Quick Release Plate
Dimensions:
8.5 x 8.13 x 4.71″ / 21.6 x 20.65 x 11.96 cm (Assembled)
WEAVER STEADMAN 3-AXIS
The Weaver/Steadman incorporates modular design with a tube frame construction that provides a lightweight, yet sturdy base for fluid camera moves. Can be mounted upright or in underslung position for the ultimate flexibility. Easy to configure and balance. This system allows for extreme tilts, extreme low angles and nodal point configurations.
Payload 120 lb
Worral Geared Head
The particular head pictured is LT-1-1060 ser. 244. It has two speed transmissions for both pan and tilt. It features a trimable 5/8ths threaded (springed plunging) pin to attach the camera with, and has a mitchell mount for attaching to support. The control wheels are detachable for transport and both gear sets can be totally disengaged to reduce the risk of damage in transport. The head can manage weights up to 200lbs, with the camera properly balanced on the head.
The worrall is useful as a nodal head, which means the center axis of tilt is above the head in the area of the camera. For certain types of precision photography positioning the camera’s aperture in the nodal position is desirable. Also, the radius around the nodal point lends itself to balancing different sizes of cameras. A fully loaded Mitchell BNCR will not rock back from an extreme tilt up or down. It is balanced so that the tilts are smooth and under no pressure from the weight of the camera. To get this same effect with a smaller camera either elevated weights would have to added above the camera or a smaller nodal head would have to be used.
A major advantage to using a geared head is the precision with which cameras moves can be duplicated. By expressing camera moves in terms of number of rotations of the pan and tilt controls moves can be copied precisely from take to take. This method also makes for smooth pans on animation sets, where the pan can be broken into fractions of a rotation for each frame.
Schulz Tiltplate HD
The SCHULZ TILTPLATE HD offers the possibility to fix and secure the tripod head of your choice in seven different positions of inclination up to a 90 degree angle. An auto-locking device provides for reliable security when transporting and handling the plate.
When folded together for transportation or storage, the measurements of the tiltplate are 150 mm x 330 mm, with a weight of only 3,5 kg.
The SCHULZ TILTPLATE HD is made of high-density anodized aluminium. All screws and axes are made of stainless steel.
Anti-slipping rubber inlays on top of the plate guarantee a firm mounting for equipment screwed on the top.
Even when the locking device is opened accidentally, a safety device ensures the plate does not fold completely, but stops automatically in the next of the seven locking positions.
ARRI GEARED HEAD MKII MITCHELL BASE
The ARRIHEAD 2 is a compact geared head designed for current film and digital cameras, with a tilt-axis centred on the camera’s optical centre. The ARRIHEAD 2 has a standard Mitchell base and is also compatible with ARRI bottom plates and other touch-and-go systems.
Camera Plate Features – Quick Release
Base Mount – Mitchell Flat Base
Drag Control – 3-Step
Vertical Tilt – +90° to -90°
Load Capacity – 110 lb / 49.9 kg
CARTONI C40 DUTCH HEAD
C40S Dutch Head with one pan bar. For cameras weighing up to 100 lbs.
This special accessory has been conceived to add a 3rd axis to a standard Fluid Head and allow the lateral movement called “Dutch angle”, enhancing special effects.
CARTONI C40S Dutch Head is designed to make exceptionally smooth side-tilt effects simple and straightforward to execute.
The Dutch Heads integrates the award winning CARTONI fluid module in progression from “0” to 7 intensity. The counterbalance system features the 7 step spring mechanism.
The CARTONI Dutch Head interface directly with the quick release plate on any camera support head featuring the European style quick release plate or can be attached by 2 3/8″ screws.
A special telescopic orientable pan bar completes the equipment.
Load Capacity – 100.0 lb
Diameter/Thread – 2x 3/8″ Screws
Counter Balance System – Single Spring Module
Counter Balance Range – 7 Settings
Center of Gravity – 6″
Quick Release/Wedge Plate – Yes, (Cat #K512)
Balance Plate – Sliding, with 2x 3/8″ Screws
Tilt Drag – 7 Settings, + 0
Tilt Range – -65° / +65°
Tilt Lock – Yes
Spring Loaded Counter Balance – Not Applicable
Pan Range – Not Applicable
Pan Lock – Not Applicable
Leveling Bubble/Illuminated – Yes, Non
Temperature Range -22° to +158°F (-30° to +70°C)
Weight 17.0 lb