The Total Dutch Axis: a Cartoni patented new revolutionary tool to add a 3rd Axis lateral rotation to any classic heavy duty pan and tilt head. Allows unprecedented 360 ° rotation for extraordinary creative shots. The rotation is driven by a steering wheel pierced in the centre for cable channel. The camera plate is short to fit the inversion of the camera slide. The Total Dutch head is available as a complete product ready to be installed on top of any head via two 3/8 “ screws, or can be composed with Lambda 25 3rd Axis plus the camera stage of the Lambda 25 head. Two 1 kg (2.2 Lbs) counterweights complete the set for true nodal rotation around the optical centre.

Weight – 10.5 kg/ 23 lbs
Maximum Payload Capacity – 25 kg/ 55 lbs
Bowl Diameter – Flat base
Fluid Drag – Continuous
Operational temperature – -40/+60°C Celsius

The 3rd Axis for Lambda 50 adds the roll axis to the classic nodal head. The Lambda 50 3rd Axis is mounted in replacement of the Lambda 50 camera stage, creating 3 independent rotation axis for pan, tilt and roll. The precision cranks adjusting the slide allow the nodal setting to be combines on all 3 axis.
It includes an additional 7 steps + zero fluid drag unit and a rod with counterweight to compensate off-set positions.

Weight – 15.5 kg/ 34 lbs
Maximum Payload Capacity – 40 kg/ 88 lbs
Bowl Diameter – Plate
Fluid Drag – 7 steps + 0
Tilt Range – 360°
Operational temperature – -40°/+60° Celsius

The multi award-winning Lambda 50 nodal head is the only support that allows to set the nodal position with any camera and pivoting 360° on the focal plan of the camera. The settings are achieved by graduated slides both horizontally and vertically with micrometric cranks for extreme precision. Movements are assisted by a 7 steps fluid system + “0” on all axis. A smart system of orientable counterweight rods can be used when the slide run is not sufficient to set the center of gravity (CG) and match the nodal point. The Lambda 50 head can be mounted on any classic support as tripods or dollies or used in underslung position from Cranes and Jib arms. Optional accessories as hard case, 3rd Axis, steering wheel, eyepiece holder and additional counterweight rods complete the most versatile of camera supports.

Weight – 21 kg/ 46 lbs
Maximum Payload Capacity – 50 kg/ 110 lbs
Bowl Diameter – Flat
Fluid Drag – 7 steps + 0
Tilt Range – +/-65°
Operational temperature – -40°/+60° Celsius

The 3rd Axis of the Lambda 25, allows nodal setting in 3 rotation axis, as if included in a sphere. It can be mounted on any existing Lambda 25 by simply disassembling the two “L” shaped frames and inserting the 3rd Axis axis in between. Ideal for underslung use on dollies or cranes. A short camera plate to fit the inverted camera slide and two 1 Kg (2.2 Lbs) counterweights complete the package.

Weight – 5.8 kg/ 13 lbs
Maximum Payload Capacity – 20 kg/ 44 lbs
Bowl Diameter – Flat base
Fluid Drag – Continuous
Operational temperature – -40/+60°C Celsius

Lambda 25 is a unique tool for refined precision & creative movement versatility and in many VFX.

Weight – 12 kg/ 26 lbs
Maximum Payload Capacity – 25 kg/ 55 lbs
Bowl Diameter – Flat base
Fluid Drag – Continuous
Tilt Range – 360°
Operational temperature – -40°/+60° Celsius

The Weaver/Steadman incorporates modular design with a tube frame construction that provides a lightweight, yet sturdy base for fluid camera moves. Can be mounted upright or in underslung position for the ultimate flexibility. Easy to configure and balance. This system allows for extreme tilts, extreme low angles and nodal point configurations.

Payload 120 lb