Showing 16–30 of 106 resultsSorted by latest
Doorway Dolly
The Doorway Dolly will move through a full range of travel with either the Push Bar or Pull Bar. Load it with gear to get to the location with ease! The platform can be flipped over for even lower camera positioning. Ground clearance is 9″ or 3″ when inverted. The removable side boards add an extra 10″ per side for increased platform width.
Flowtech 75 Aktiv
Work faster whatever the conditions with the Sachtler flowtech®75 aktiv Carbon Fibre tripod; optimised for enhanced performance and speed with the advanced Sachtler aktiv fluid head. The unique flowtech design allows you to deploy and adjust in the time it takes to release a single catch.
Being able to quickly set up and level a shot in any environment and terrain gives you more time to be creative and get the perfect shot. The Sachtler flowtech® 75 aktiv MS carbon fibre tripod’s mid-level spreader and rubber feet mean that each leg extends or retracts independently of the other two. Each leg has an individual clamping mechanism so that you can loosen and lock them from a single location near the 75 mm bowl. This deployment speed is paired with an easy to use ergonomic, lightweight design that can follow into the most intense environments.
SPECS:
Payload – 44.1 lb
Bowl Size – 75 mm
Spreader Type – Mid-level spreader
Material – Carbon Fibre
Transport Length – 26.8 in
Tripod Stages – 2
Weight – 7.7 lb
Height Range Without Spreader – 10.2 in to 60.2 in
Height Range With Mid Spreader – 24.8 in to 61.8 in
Weight Without Spreader – 6.4 lb
Easyrig Vario 5 with STABIL G3 (Standard Vest)
An adjustable, body-worn support system for camera rigs weighing 11 to 38 lb. This system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles and distributing it across your torso.
This system consists of the standard-size Gimbal Rig vest with the EASYLOCK ratcheting buckle, a standard top support bar for shoulder mounting, a quick release camera mount, and a STABIL G3 dampening arm to reduce walking motion in your footage.
Stabilizer Type
Vest System
Load Capacity
11 to 37.5 lb / 5 to 17 kg
Camera Mount
Quick Release
Additional Mount
1/4″-20 Female
Height
40.6 to 44.5″ / 103 to 113 cm
24.4″ / 62 cm
Depth
12.2″ / 31 cm
8.7″ / 22 cm (Folded)
Weight
12.1 lb / 5.5 kg
Counterweights
None
Vest Weight
5.3 lb / 2.4 kg
Belt Size
31 to 51″ / 78.7 to 129.5 cm
Suspension Line Length
35.4″ / 90 cm
Easyrig Mini Strong
The Easyrig Mini Strong Camera Support supports from 9 to 13 lbs of camera weight, relieves the strain of that weight from your arms, and leaves you only with the job of maneuvering the camera in desired directions.
Load Capacity
9 – 13 lbs (4 – 6 kg)
Suspension Line Length
39″ when fully stretched (99 cm)
Max Waist Hip Strap Length
55″ (140 cm)
Dimensions
Mounted height: 37″ (94 cm)
Folded: 22 x 11 x 7.5″ (56 x 28 x 19 cm)
Weight
7.3 lbs (3.3 kg)
ARRI Master Grip
With a form factor based on the classic ARRI handgrips, the Master Grips add flexible and responsive fingertip control for handheld shooting.
Aimed at ALEXA, AMIRA, and third-party camera operators, the Master Grips can also be mounted on tripod pan handles, and on pedestal heads for controlling cameras in studio or multicamera setups.
Control Features
Start/Stop Recording
Iris Control
Focus Control
Control Input
2 x LEMO 4-Pin (LBUS)
Attachment Method
ARRI/Hirth Rosette
Power Consumption
12 to 34 VDC at 30 mA
Weight
13.4 oz / 380 g
SHAPE SHOULDER PAD
The Shape Composite Shoulder Pad is for the Shape F3 Composite Support Rig and intended for use with larger-sized cameras such as the F3, EX1, and P2hd, whereas for DSLRs and the C300, the Adjustable Composite Shoulder Pad or the Mini Composite Shoulder Pad would be better.
Camera Comfort Cushion
The 7.5 x 7.5″ Camera Comfort Cushion from Alan Gordon Enterprises was developed to help eliminate common upper extremity disorders and musculoskeletal injuries associated with carrying cameras.
This cushion is designed to give maximum flexibility and comfort suited to the needs of the camera operator. The cushion works with a variety of camera sizes, from shoulder-mounted camcorders to broadcast-sized and film cameras.
Materials
Top: 2 mm Neoprene
Bottom: Non-Slip Neoprene Mesh
Strap Length
Underarm Strap: Up to 23″ / 58.4 cm
Chest Strap: Up to 47″ / 119.4 cm
Pocket
Pad Pocket: 7.5 x 4.5″ / 19.05 X 11.43 cm
Closure Type
Pad Pocket Closure: 7″ / 17.8 cm Zipper
Inserts
0.75″ / 1.9 cm Rubber Insert
0.06″ / 0.15 cm Plastic Insert
0.25″ / 0.63 cm Foam Insert
Dimensions
7.5 x 7.5″ / 19.05 x 19.05 cm
Weight
7 oz / 198 g
SmallRig Shoulder Pad
Switch between handholding your cinema camera and mounting it on a separately available VCT-14 tripod adapter plate.
The Shoulder Pad Pro features a durable aluminum baseplate, and a comfortable, integrated silicone shoulder pad allows you to handhold your camera for long periods.
Rod Standard
15 mm LWS / 60 mm Spacing
Battery Plate Type
None
Accessory Mounting
Baseplate: Multiple x 1/4″-20 Female Thread
Camera Mounting
Manfrotto 501 Plate with 1/4″-20 Male Screw, 3/8″-16 Male Screw
Tripod Mounting
Baseplate: V-Lock, VCT-14
Rod Ports
Baseplate, Front: 2 x 15 mm Rod Port
Baseplate, Rear: 2 x 15 mm Rod Port
Rosettes
2 x ARRI Rosette w/ M6 Female Thread
Materials
Aluminum, Silicone
Dimensions
9.9 x 3.9 x 2″ / 25.1 x 9.8 x 5.1 cm
Weight
1.6 lb / 740 g
Element Technica Mantis-I Handheld Kit
A shoulder mounting solution for film and digital motion picture cameras.
It includes a shoulder pad and dovetail, a crossbar, and a universal handle kit.
Length Contracted:
9″ (23 cm)
Extended: 14″ (35.6 cm)
Rosette Type
ARRI standard
Worral Geared Head
The particular head pictured is LT-1-1060 ser. 244. It has two speed transmissions for both pan and tilt. It features a trimable 5/8ths threaded (springed plunging) pin to attach the camera with, and has a mitchell mount for attaching to support. The control wheels are detachable for transport and both gear sets can be totally disengaged to reduce the risk of damage in transport. The head can manage weights up to 200lbs, with the camera properly balanced on the head.
The worrall is useful as a nodal head, which means the center axis of tilt is above the head in the area of the camera. For certain types of precision photography positioning the camera’s aperture in the nodal position is desirable. Also, the radius around the nodal point lends itself to balancing different sizes of cameras. A fully loaded Mitchell BNCR will not rock back from an extreme tilt up or down. It is balanced so that the tilts are smooth and under no pressure from the weight of the camera. To get this same effect with a smaller camera either elevated weights would have to added above the camera or a smaller nodal head would have to be used.
A major advantage to using a geared head is the precision with which cameras moves can be duplicated. By expressing camera moves in terms of number of rotations of the pan and tilt controls moves can be copied precisely from take to take. This method also makes for smooth pans on animation sets, where the pan can be broken into fractions of a rotation for each frame.
TANGO I SWING HEAD
The TANGO is a convenient third axis: whatever fluid or geared head is chosen, the panoramic movement remains horizontal and the tilt stays vertical.
The maneuvering of the fluid or gear head remains unchanged. The twin support and racks add further advantages to TANGO such as silence, steadiness and flexibility when moving your camera, and a locking position range of 90° degrees.
Weight:
10 pounds
Ceco Geared Wedge
The Geared wedge allows for extra tilt function, camera quick release ability, and balance adjustment for long lenses or off center configurations.
Weight:
12 lb
100mm Hi-Hat
The cast iron 100mm Hi-Hat works with any fluid head that has a 100mm ball base.
The hi hat comes mounted on a hi hat board that has cut corners (octagon shape) in order to fit into tighter spaces
Each leg has a 1/4″ hole for easy mounting to wood or metal plates.
Weighs
2.05 pounds.
150mm Hi-Hat
The Cast Iron Ball/Claw Hi-Hat works with all professional fluid heads with a 150mm ball mount.
The 3 legs have holes for mounting it to a wood or metal plate. The hi hat comes mounted on a hi hat board that has cut corners (octagon shape) in order to fit into tighter spaces.
Weighs
3.25 pounds.
