Showing 1–15 of 106 resultsSorted by price: high to low
DJI Ronin 2 3-Axis Handheld/Aerial Stabilizer
The versatile Ronin 2 gimbal from DJI is suitable for use either handheld or mounted in a variety of ways including onto a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. This means it can be used for everything from DSLRs up to cinema cameras such as the ARRI ALEXA Mini or Sony FX9. Like its predecessor, the Ronin 2 features support for underslung, upright, and briefcase operation modes to help you achieve the best angle. However, it has been redesigned to enable easy transition between upright and underslung modes without changing the position of the camera. It also offers several other improvements, such as enhancements to the control software and physical design to simplify taking complex shots without sacrificing performance, all while making important functions more readily accessible.
SPECS:
| Load Capacity | |
| Number of Axes | |
| Rotation Range | |
| Follow Speed | |
| Stabilization Accuracy |
Compatibility
| Camera Control | |
| Camera Compatibility |
Connectivity
| Inputs/Outputs | |
| Mobile App Compatible |
Battery
| Battery Type | |
| Battery Runtime |
General
| Display Type | |
| Operating Conditions | |
| Dimensions | |
| Weight |
Nodo Film Systems Inertia Wheels MAX 3-Azis Pro Kit
The NODO Inertia Wheels MAX 2-Axis is a wireless long-range digital camera controller featuring proprietary, patented MAX Inertia Motors™ inside the wheels. Operators can use both mass and drag to help both creatively and technically to achieve difficult and creative shots. The Inertia Wheels are compatible with Freefly MōVI, DJI Ronin, and more gimbals. The controller has dual-band, long-range 400-950MHz+2.4GHz wireless communication beyond 1 mile with a fast refresh rate of 100Hz. Optional hardwire connection of up to 2000ft. Our kit includes an Ignite Digi battery plate to create the ultimate power solution for Inertia Wheels that includes regulated ports for accessories, leverages the power of TB50 batteries, and adds hot-swapping with block batteries. The Inertia Wheels MAX include the same advanced, long-range, full-duplex dual 800-900MHz and 2.4GHz radios for up to 1-mile wireless range. Where other wheels fail, the Inertia Wheels radios have achieved legendary status amongst drone pilots and professionals all over the world.
Features:
- High Torque Solid State PCB Motors
- Patented Adjustable Weighted Wheels
- Wireless Long-Range Camera Controller
- Compatible with DJI Ronin, MōVI and many more
- Optional 3rd Axis Wheel
- 1 Mile Wireless Range
- 2000ft Cabled Range
- 10ms latency
- Transmit on 434MHz, 868MHz, 915MHz
- Receive on 2.4GHz
- Built-in frequency scanner
Input/Output:
- Power: 10-35v DC Lemo Port
- Data: 2x UART Lemo Ports
- Hardwire: 4-Pin Molex
- Micro USB 2.0
- Ignite Digi Battery Plate for DJI TB50 Battery
Inertia Wheels MAX Compatibility:
- DJI Ronin (1, 2, M, MX, RS, RS2)
- Freefly MōVI (Pro, XL)
- Arri Trinity 1 / Maxima*
- eMotimo ST4
- Inspire 2*
- Shotover*
- Newton Nordic*
- Kessler Cineshooter*
- Talon Head*
- Defy EX Camera*
- Filmotechnic Heads*
- Virtual Production: Cinetracer, Unreal Engine, Cinema4D
- NODO Training Software
* Requires additional hardware for support.
Blackbird Mantis Rig Kit
Everything you need to use your Mantis on an easy rig. Note: Does not include the easy rig quick release as you’re able to convert your existing one to use with the Mantis. If you don’t have an easy rig quick release you can add one when you configure your bundle.
DJI Ronin 4D Flex Extension Unit
Ideal for solo operators or tight spaces, the DJI Ronin 4D Flex Extension Unit allows you to detach your Ronin 4D’s Zenmuse X9 gimbal camera and expand its filming possibilities. One end of the Flex attaches to the main Ronin 4D body while the other secures the X9 camera, reducing your handheld operation weight to just 4 lb. A 6.6′ cable maintains communication between the two units for remote head configurations and supports transmission of up to 8K video. You can easily attach your Ronin 4D handgrips to the Flex thanks to the included adapters. Even the main monitor can be secured to the Flex using its cold shoe mounting point. Other mounting threads allow you to secure the attached X9 to extension rods or tripods.
| Compatibility |
DJI Osmo Pocket 3 Creator Combo
Capture steady and smooth motion videos with the DJI Osmo Pocket 3. Boasting a wide range of upgrades over its predecessor, the Osmo Pocket 3 features a 1″ CMOS sensor with full-pixel fast focusing, ensuring high-quality, low-noise footage acquisition even in high-contrast environments and with resolutions up to UHD 4K120. Three built-in microphones capture stereophonic sound while reducing ambient noise, and new software enhancements bring ActiveTrack 6.0 to your fingertips for precise subject tracking in both photo and video modes with smart horizontal and vertical shooting modes as well as D-Log M and 10-bit support.
| Image Sensor | |
| Image Stabilization |
| Focal Length | |
| Maximum Aperture | |
| Minimum Focus Distance | |
| Field of View |
| Internal Recording | |
| Still Image Support | |
| Audio Recording | |
| IP Streaming |
| Shutter Speed | |
| ISO/Gain Sensitivity | |
| White Balance |
| Wireless | |
| Mobile App Compatible | |
| Media/Memory Card Slot | |
| Inputs/Outputs |
| Battery Type | |
| Charging Time | |
| Estimated Battery Life |
DJI Ronin 4D 4-Axis Cinema Camera 8K Kit
The Ronin 4D 4-Axis Cinema Camera 8K Kit from DJI combines imaging, stabilization, and focusing in a lightweight, uniquely flexible gimbal/camera rig. This 4D X9-8K version pairs the Ronin 4D gimbal with the Zenmuse X9-8K camera, a DJI DL 17-28mm T3.0 lens, a LiDAR range finder, a low-pass filter, and a RAW license that requires activation via DJI; wireless video transmission is available separately. With support for up to 8K60 17:9 video in Apple ProRes RAW, and 8K30 17:9 and 8K75 2.39:1 in ProRes 422 HQ, the X9-8K offers the higher imaging standards required for visual effects, cine-style capture, and broadcasting while reducing your setup time with its all-in-one combination design.
- Left and right control handgrips
- LiDAR range finder
- Integrated 5.5″ monitor
- NOTE: Does not include the high-bright main monitor
- TB50 battery and charging adapter
- Top handle
- Baseplate
- Hard carrying case
- 7″ high-bright, touchscreen monitor
- Wireless video transmitter
- X9 focus motor
- 3-channel FIZ lens control unit
- Expansion plate with SDI, XLR, and timecode ports
- DJI Leica L and M lens mounts
- Third-party ARRI PL and Sony E lens mounts
- Support for the industry-standard ACES workflow provides easy compatibility with other cinema cameras.
- The DJI DCCS color science reproduces vivid, natural skin tones in a range of lighting conditions and creates looks that are compatible with ARRI footage.
- The full-frame Zenmuse X9-8Kcamera uses a proprietary chip for advanced processing and high-performance computing.
- Selectable Z-axis stabilization reduces unwanted vertical camera movement, especially during dollying moves.
- Z-axis stabilization is built into the camera; 4-axis stabilization in the gimbal.
- Tilt stabilization uses dual, symmetrical motors.
- Pan and X (roll) axes with additional stiffness buffering.
- Downward ToF (time of flight) sensor.
- Forward and downward-facing dual-vision sensors.
- Built-in IMU (inertial measurement unit) and barometer.
- New and improved stabilization algorithm.
- The D4’s DL lens mount supports full-frame capture with DJI’s current selection of lightweight, carbon fiber 18, 24, 35, and 50mm lenses.
- Interchangeable lens mounts are available for use with Sony E-mount or Leica M-mount lenses.
- Supports ultrawide, f/0.95 large-aperture, electronic zoom, macro, and anamorphic cine lenses.
- Please see the current lens compatibility list here.
- Up to 8K60 ProRes RAW in 17:9 full frame or 5.5K 60 fps ProRes RAW in 17:9 Super35.
- RAW activation required with DJI.
- Up to 8K30 ProRes 422 HQ in 17:9 full frame.
- Up to 8K75 ProRes RAW in 2.39:1 full frame.
- Up to DCI 4K60 ProRes 422 HQ or H.264 in 17:9 full-frame or Super35.
- Up to UHD 4K120 ProRes HQ, HQ LT, or H.264 in full frame.
- With Dynamic Range Expansion off: Dual native ISO 320/1600.
- With Dynamic Range Expansion on: Dual native ISO 800/4000.
- EI 200 to EI 6400.
- 14.7 stops of dynamic range produce nuanced imaging under a range of lighting conditions.
- LiDAR (light detection and ranging) system uses up to 43,200 ranging points within a 33′ range.
- Excellent focusing performance even in low-light environments.
- Focus pulling can be viewed graphically, thanks to a built-in depth meter.
- Intuitive and highly accurate focusing system.
- Modular LiDAR focusing module attached to the front of the D4 rig.
- Maintains focus, even when motion blur is produced by fast-moving subjects.
- Separately available focus motor for use with manual lenses.
- Continuous autofocus is compatible with ActiveTrack Pro, a boon for solo operators.
- The AMF function (Automated Manual Focus) combines the accuracy of manual focus with the ease of autofocus.
- Operators can grab the focus wheel of the right handgrip at any time to manually focus.
- Handgrip focus wheel uses dynamic damping to provide a physical feel for focus changes.
- Built-in ND.03 to ND2.7 filters let you easily adjust to quickly changing lighting conditions.
- Especially handy for outdoor shoots with changing cloud cover.
- Motorized filter system.
- DJI’s ActiveTrack Pro features combine continuous autofocusing with composition adjustment for professional-looking tracking shots out of the gate.
- ActiveTrack Pro is based on computer vision, deep learning technology, and the computing power of DJI’s CineCore 3.0 imaging system.
- Right-hand grip has a focus wheel that doubles as a control for main camera adjustments (menus, exposure, etc.).
- Left-hand grip has a full-range joystick to control pan/tilt; useful when adjusting headroom and more during follow mode.
- Top-notch stabilization in a lightweight form.
- Ideal for both solo operators as well as assistant-accompanied shoots.
- Designed to counter footsteps from inexperienced gimbal shooters.
- Works equally well with a single grip, dual grips, shoulder supported, or tripod mounted.
- Sport mode is available with the touch of a button, accommodating faster-paced action.
- Use in standard, underslung, jib, and crane setups.
- Requires a ProSSD 1TB drive (included) to capture raw footage.
- USB-C port for external recording; no reader needed to offload footage.
- Integrated CFexpress Type-B card slot.
- 5.5″ 1920 x 1080 monitor.
- 1000 cd/m² display.
- Touchscreen control.
- Integrated stereo microphones capture dual-channel 24-bit audio.
- Built-in 3.5mm audio input port and XLR port via expander plate.
- Uses the same TB50 intelligent batteries as the Ronin 2 and Inspire 2.
- Each battery provides up to 2.5 hours of capture time.
- Batteries charge fully in approximately 1.5 hours.
- Support auto-heating for cold weather use.
- AC adapter for uninterrupted shooting.
DJI RS 4 Pro Gimbal Stabilizer
Enhanced operation efficiency, native vertical shooting, and an expanded accessory ecosystem make the DJI RS 4 Pro a powerful tool for the mirrorless camera shooter. The gimbal only weighs around 2.74 lb and sports a load capacity of 10 lb capable of supporting your compact camera build. The combo includes a Focus Pro Motor with a rod mount kit, a Ronin Image Transmitter, a focus gear strip, a briefcase handle, and a carrying case. Teflon-coated axes reduce friction for a smoother balancing and operating experience. Other intuitive features include a fine-tuning knob, auto-locking OLED screen, and RSA communication port for use with expanded accessories.
SPECS:
| Gimbal Design | |
| Load Capacity | |
| Number of Axes | |
| Wireless Frequency | |
| Wireless Protocol | |
| Mobile App Compatible | |
| Mounting | |
| Weight |
OCONNOR ULTIMATE 2560 FLUID HEAD
The Ultimate 2560 Fluid Head Package from OConnor is designed for use with the current crop of digital cinema cameras. Weighing less than 18 pounds, 2560 is capable of supporting camera payloads up to 66 pounds at a 6″ center of gravity above the platform, making it well suited for cameras such as the ARRI Alexa in a portable configuration or any lightweight digital cinema camera in a full studio configuration. The head comes packaged with both a Mitchell base and a 150mm ball base adapters with tie-downs for expanded tripod compatibility. It also comes with a large Euro-style quick release for rapid mounting and dismounting of large camera rigs, a pan handle, and a pan handle extension.
SPECS:
| Base Mount | |
| Counter Balance |
| Vertical Tilt | |
| Load Capacity |
Matthews Brauer Hostess Tray
The Brauer Hostess Tray Kit from Matthews allows for mounting of film and video cameras to a car’s side door for shooting profile shots through a window. The Brauer kit adjusts with the window’s up/down movement, and also allows for the vehicle door to be opened and closed without restrictions. This lets your talent conveniently enter and exit the vehicle without requiring your grip to constantly set up and tear down the car mount. It is compatible with nearly any camera and gimbal stabilization system, and includes a 10 x 14″ aluminum cheese plate that slips between the window and door of nearly any vehicle, securely attached to the side of the car by vacuum cups, 5/8″ rods, grip heads, and quick struts.
Panther Vacu Rigg
The Panther VacuRigg System is a high-quality tool giving the creative cameraman the means for camera shots. It is ideal for mounting cameras, lights or other accessories on all smooth surfaces like windows, cars, walls etc. Everytime – everywhere!
Depending on how the VacuRigg is used, the three suction pads can carry a maximum payload of up to 100 kg / 220 lbs. The Mounting plate is designed in such a way that it can accept the camera directly or mounted with a wedge/tilt plate (180066) with 3/8″ screws. Assembly is completely done within seconds.
Inovativ Apollo 40 EVO Cart
The Apollo 40 EVO Cart from Inovativ can be used on set, in the studio, or on location to transport your cinema equipment. It can also function as a mobile workstation for data management operators. The cart can be configured to hold several monitors, a laptop, or a camera. The rigid and stable internal main frame supports 1200 lb, and the cart is constructed with 5052 and 6061 aluminum with stainless steel hardware. All machined parts are type II and III anodized with a black powder-coated top and bottom shelves. The dual-purpose top shelf has a drop-down lip that can be used as a workstation for your computer keyboard, or you can leave it up to prevent equipment from sliding off. The top shelf also has three built-in threaded rail plates, each with twenty-two 3/8″-16 and ten 1/4″-20 threaded holes to mount different accessories. Optional drawers are available to attach to the top and bottom shelves of the cart. No tools are required to assemble the cart because it has a Corner Cam Lock System, which enables you to disassemble the cart and fold it down to a 7.5″ tall trunk with all the parts and wheels inside.
Matthews Pump Cup – 6″ Suction Cup
Pump it up to create an amazing bond to non porus surfaces. It has a fixed 5/8 in stud. Will support up to 5 lbs (2.3 kg).
MYT Works Medium Glide Camera Slider
MYT Works Glide Camera Sliders are designed for smooth motion and precise starts and stops. They support up to the largest cameras in various modular setups, and offer the durability to withstand extended wear and tear and extreme weather. You can safely use them in harsh environments, like dusty deserts, humid rainforests, and dry tundras. They’re made in New York City and machined from industrial-grade steel and aluminum. This Medium Glide Camera Slider is 5′ long and features a 100mm bowl. It has 10mm double extrusion rails with a 7″ span between them and supports up to 80 lb loads.
Kessler Crane CineSlider
The CineSlider from Kessler Crane is a belt-driven, heavy-duty camera slider supporting up to 80 lb, and this model measures a total length of 60.5″, it has a total weight of 12 lb, and a travel distance of 51″. The slider is made of reinforced aluminum, and the slide rails are on the inside, where they’re better protected.
eMotimo Spectrum ST4 Pro
The Spectrum ST4 + Fz Pro from eMotimo adds FIZ control to the ST4 Motion Control Pan & Tilt Head. This robust aluminum head supports a maximum equipment load of 15 lb and includes a 3.9″ forward/back adjustment plate for proper camera balance. Head features include smooth ramping, the ability to set up to seven keyframes, and 11 preset moves ranging from a quiet interview to turbo mode. This motion control head features accurate move repetition, even at high speeds.