Showing 31–45 of 106 resultsSorted by latest
Spidergrips Adjustable Extension Bar
Adjustable extension bar with M6 accessory thumb knob, uses high strength stainless steel travel-rods with an extension range of over 3 inches.
Weight: 10.7 oz.
Spidergrips 6 in. length extension bar
Spidergrips right/Left side 6 in. length extension bar with M6 accessory thumb knob
Interchangeable with SP-LEX
M6 Accessory Thumb knob (thumb-knob item #SP-K6M) for use with Spidergrips Preston Microforce adapter bracket or Spidergrips On/Off Module
Weight:
4.5 oz.
Redrock MicroHandGrip (Blue)
A rubberized handgrip with an integrated all-metal rod clamp and thumb screw to provide a comfortable, non-slip handle.
Attaches to 15mm rod/rail support systems such as Redrock’s micro Shoulder Mount and its DSLR support rigs.
Attachment Method
Attaches via Rod Ports
Rod Standard
15 mm Single Rod
Rod Ports
1 x 15 mm Rod Port
Accessory Mounting
None
Shoe Mounting
None
Rosettes
None
Rail Mounting
None
Sachtler CF-100ENG Tripod
The CF 100 ENG HD 2CF two stage, heavy-duty tripod, provides maximum stability and carrying capacity.
Constructed and drawn out of one-piece of carbon fiber material, it is twist resistant and lighter than dural aluminum. It features a 100mm / 4″ bowl, tube diameter of 24mm (0.94″) for extra stability, and is fitted with the Sachtler quick clamping system, so you can securely and visibly lock the tripod.
Head Mount Type
100 mm Bowl
Maximum Working Height
61.8″ / 156.972 cm
Minimum Working Height
20.1″ / 51.054 cm
Closed Length
28.4″ / 72.136 cm
Materials
Carbon Fiber
Weight
9.5 lb / 4.31 kg
Sachtler Flowtech 75 MS Carbon Fiber Tripod
The Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 7 pounds yet they can support a payload of up to 44 pounds, and extend from a minimum height of 24″ to a maximum height of 61″ when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.
Load Capacity
44.1 lb / 20 kg
Head Mount Type 75 mm Bowl
Maximum Working Height
60.24″ / 153 cm (without Spreader)
Max Height without Center Column
60.2″ / 153 cm (without Spreader)
Minimum Working Height
10.24″ / 26 cm (without Spreader)
Closed Length
26.8″ / 68 cm
Materials
Aluminum, Carbon Fiber
Operating Temperature
-40 to 140°F / -40 to 60°C
Weight
6.4 lb / 2.9 kg
Leg Lock Type
Flip Lock
Leg Positions
3 Positions
Independent Leg Spread
Yes
Leg Sections
3
Bubble Level
None
Feet Features
Rubber, Removable, Spiked
SpreaderMid-Level, Ground (Included)
WEAVER STEADMAN 3-AXIS
The Weaver/Steadman incorporates modular design with a tube frame construction that provides a lightweight, yet sturdy base for fluid camera moves. Can be mounted upright or in underslung position for the ultimate flexibility. Easy to configure and balance. This system allows for extreme tilts, extreme low angles and nodal point configurations.
Payload 120 lb
Manfrotto Hi Hat
The Manfrotto 529 Hi Hat with 100mm Bowl facilitates shots from the very low positions. The feet are rubber padded to protect delicate surfaces and have a hole so that it can be screwed down to a ladder, apple box, or sheet of plywood.
Material
Aluminum
Load Capacity
44 lb (20 kg)
Maximum Height
7.68″ (19.5 cm)
Minimum Height
5.7″ (14.5 cm)
Center Column
None
Leg Sections
1
Leg Cross Section
Round
Leg Tube Diameters
19 mm
Head Fixing
100 mm
Weight
5.95 lb (2.7 kg)
Mitchell Lo-Hat on Octagon Board
This mount is constructed from high-strength, heat-treated aluminum and can be used as a Mitchell interface when constructing specialized rigs and setups. This Low Hat Mount comes with 3 Mitchell keys for easier set-up, and all three legs have mounting holes for securing it to a mounting board.
Compatibility
Mitchell Base Heads 2065, 2575D, 120EX
Mitchell Hi-Hat on Octagon Board
This high hat features three keyways making it quicker to align the head’s locating key to the high hat. In addition if one of the high hat’s keyways becomes damaged, you can still mount your tripod head using one of the other two keyways and continue shooting. The pre-drilled mounting holes in the high hat’s support feet make it easy to attach the high hat to structures for long-term projects.
Head Attachment Fitting
Standard Mitchell
3 x Keyways
Material of Construction Aluminum with a powder coated finish
Mountable
Pre-drilled Holes
3 x 3/8″ non tapped
One hole in each of the high hats support feet
Height
4.5 ” (11.4 cm)
Candrevaplate RA
The CANDREVAplate RA solves the problem of mounting the camera on its side and still being able to pan and tilt the camera normally.
The CANDREVAplate RA snaps into the O’Connor 2575 and allows the camera to be rigidly held on it’s side for those shots looking to utilize the best resolution of the camera’s sensor in the vertical orientation.
- Heavy-Duty L-Shaped Plate
- Mount Your Camera Vertically
- Compatible with OConnor 2575 Head
- Multiple Mounting Holes, Bubble Level
- Includes 2 Quick Release Plates
Compatibility
OConnor 2575 Head
Ronford-Baker RBQ
Multiple Heads with Euro Plate Receiver
Physical
Mounting:
9 x Pass-Through Holes
1 x OConnor 2575 Quick Release Plate
Dimensions:
8.5 x 8.13 x 4.71″ / 21.6 x 20.65 x 11.96 cm (Assembled)
8 Ball Camera Slider w/ Mitchell Base 6′
CNC Machined
All parts of the camera slider are CNC machined from billet 6061 aluminum.
Deburred
All parts of the camera slider are tumbled in a de-burring machine for approximately 2 days for a smooth finish with no sharp edges.
Assembly
The camera sliders are assembled with stainless hardware. The bearings are German and Swiss made. Parts are black anodized with a flat black color.
FilmAir Starter Ramp for 24″ Dolly Track
The starter ramp for hi-load dolly track is constructed of anodized structural aluminum fitted with precision machined stainless steel cones and connectors, for corrosion proof durability.
Overall Length
27.6″ (701 mm)
Width
26.4″ (671 mm)
Weight
6.5 lbs. (3 kg)
FilmAir 90 Deg. Curved 24-1/2″ Dolly Track
The hi-load curved dolly track is constructed of anodized structural aluminum and designed to carry maximum loads with minimum deflection.
Flexing between crossbars is prevented as the rails are in contact with the ground along their entire length. Therefore, the load carrying capacity is rated in excess of two tons. Four of these curved sections are needed to make up a circle, which has a 14 ft. (4.2 m) outside diameter.
Overall Length
119″ (3018 mm)
Width
43.2″ (1097 mm)
Weight
29.5 lbs. (13.5 kg)
FilmAir 45 Deg. Curved 24-1/2″ Dolly Track
The hi-load curved dolly track is constructed of anodized structural aluminum and designed to carry maximum loads with minimum deflection.
The inner and outer rails are in contact with the ground along their entire length preventing any flexing between cross bars.
Therefore, the load carrying capacity is rated in excess of two tons. Eight of these curved sections are needed to make up a circle, which has a 20 ft. (6.0 m) outside diameter.
Overall Length
91.2″ (2316 mm)
Width
32.4″ (823 mm)
Weight
22.5 lbs. (10 kg)
FilmAir Hi-load Aluminum 24-1/2″ Dolly Track
Hi-load swing fold dolly track is constructed of anodized structural aluminum, and designed to carry maximum loads with minimum deflection. The track rails are flush with the ground, and thus supported along their entire length preventing any flexing between crossbars.
The load carrying capacity of this track is rated in excess of two tons fitted with precision machined stainless steel cones and connectors for corrosion proof durability and maintenance free use.
This track is light enough to carry to any location but rugged enough to survive the heaviest usage and proven by time to sustain less than 20% of damage recorded on heavier steel track.
Std. Lengths
2 ft. (607 mm)
4 ft. (1219 mm)
6 ft. (1829 mm)
8 ft. (2439 mm))
10 ft. (3048 mm)
Weight Length
8.5 lbs. (3.9 kg)
13.5 lbs. (6.1 kg)
19.5 lbs. (8.9 kg)
23 lbs. (10.6 kg)
28.5 lbs. (13 kg)