CARTONI C40 DUTCH HEAD
C40S Dutch Head with one pan bar. For cameras weighing up to 100 lbs.
This special accessory has been conceived to add a 3rd axis to a standard Fluid Head and allow the lateral movement called “Dutch angle”, enhancing special effects.
CARTONI C40S Dutch Head is designed to make exceptionally smooth side-tilt effects simple and straightforward to execute.
The Dutch Heads integrates the award winning CARTONI fluid module in progression from “0” to 7 intensity. The counterbalance system features the 7 step spring mechanism.
The CARTONI Dutch Head interface directly with the quick release plate on any camera support head featuring the European style quick release plate or can be attached by 2 3/8″ screws.
A special telescopic orientable pan bar completes the equipment.
Load Capacity – 100.0 lb
Diameter/Thread – 2x 3/8″ Screws
Counter Balance System – Single Spring Module
Counter Balance Range – 7 Settings
Center of Gravity – 6″
Quick Release/Wedge Plate – Yes, (Cat #K512)
Balance Plate – Sliding, with 2x 3/8″ Screws
Tilt Drag – 7 Settings, + 0
Tilt Range – -65° / +65°
Tilt Lock – Yes
Spring Loaded Counter Balance – Not Applicable
Pan Range – Not Applicable
Pan Lock – Not Applicable
Leveling Bubble/Illuminated – Yes, Non
Temperature Range -22° to +158°F (-30° to +70°C)
Weight 17.0 lb
CARTONI FOCUS 22 100MM FLUID HEAD
Built with extensive use of lightweight magnesium alloys and high resistance polymer composites the Focus 22 weighs only 3.9 kg (8.6 lbs) and represents the most advanced solution of the Focus line featuring the patented Cartoni “wing” continuously adjustable counterbalance setting, and a continuously variable patented fluid damping system on both pan and tilt movements.
Weight – 3.9 kg/ 9 lbs
Minimum Payload Capacity – 3 kg/ 7 lbs
Maximum Payload Capacity – 25 kg/ 55 lbs
Bowl Diameter – 100 mm
Fluid Drag – Continuous
Counterbalance – Continuous
Tilt Range – +/-90°
Operational temperature – -40°/+60° Celsius
CARTONI FOCUS 22 TRIPOD SYSTEM
The Cartoni Focus 22 Fluid Head features a 100mm ball base and supports loads between 6.6 to 48.5 lb, with perfect balance along its entire +/-90° tilt range. Relatively lightweight at 8.6 lb, it is intended for users who usually shoot with light loads and therefore need a lightweight head, but who sometimes need to add on a heavy lens or accessory.
Camera Plate Features – Quick Release
Camera Plate Type – Euro Plate
Drag Control – Continuous
Drag Type – Fluid
Vertical Tilt – +90° to -90°
Panning Range – 360°
Load Capacity – 48.5 lb / 22 kg
Operating Temperature 0 -40 to 140°F / -40 to 60°C
Weight – 8.6 lb / 3.9 kg
CARTONI FOCUS HD 100MM FLUID HEAD
FOCUS HD Head with Cartoni Side Load QR Release Plate, with Pan Bar. The FOCUS HD fluid head is the ideal support for the latest HDV cameras weighing from 0 to 12 kg (0 to 26 lbs). Extremely compact and lightweight, the innovative Focus HD features a continuously variable fluid damping system on both pan and tilt movements and an unprecedented patented variable counterbalance which brings its range of use to cover all existing ENG and HDV cameras. The Focus HD head comes equipped with a quick release sliding camera plate, illuminated spirit level and telescopic pan bar. Its tilting range is +/- 90° with perfect response throughout the entire tilt range. It interfaces with all 100 mm bowl base tripods and supports. The extreme ruggedness and versatility together with an outstanding quality/price ratio make the Focus HD the best possible support for news operators and HDV videographers.
Payload Capacity – 12.00 kg / 26 lbs
Total Weight – 6.20 kg / 13.7 lbs
Tripod Material – Aluminium
Number of stages – 1
Spreader – Mid Level
Minimum Height (Head to ground) – 91.00 cm / 36 ”
Maximum Height (Head to ground) – 157.00 cm / 62 “
CARTONI FOCUS HD TRIPOD SYSTEM
The Cartoni Focus HD Video Tripod Head is compatible with 100mm bowl base tripods, and supports cameras weighing up to 26 lbs. Featuring a continuously variable fluid damping system on both pan and tilt movements and a patented variable counterbalance, the unit can be used with all existing ENG (Electronic News Gathering) and DV cameras. The lightweight (4.4 lbs) tripod head is easy to carry.
Camera Plate Features – Sliding Balance Plate
Base Mount – 100 mm Half Ball
Counter Balance – Continuous
Drag Control – Continuous
Vertical Tilt – +90° to -90°
Panning Range – 360°
Load Capacity – 26 lb / 12 kg
Weight – 4.4 lb / 2 kg
CARTONI LAMBDA 25 NODAL HEAD
Lambda 25 is a unique tool for refined precision & creative movement versatility and in many VFX.
Weight – 12 kg/ 26 lbs
Maximum Payload Capacity – 25 kg/ 55 lbs
Bowl Diameter – Flat base
Fluid Drag – Continuous
Tilt Range – 360°
Operational temperature – -40°/+60° Celsius
CARTONI LAMBDA 25 THIRD ACCESS
The 3rd Axis of the Lambda 25, allows nodal setting in 3 rotation axis, as if included in a sphere. It can be mounted on any existing Lambda 25 by simply disassembling the two “L” shaped frames and inserting the 3rd Axis axis in between. Ideal for underslung use on dollies or cranes. A short camera plate to fit the inverted camera slide and two 1 Kg (2.2 Lbs) counterweights complete the package.
Weight – 5.8 kg/ 13 lbs
Maximum Payload Capacity – 20 kg/ 44 lbs
Bowl Diameter – Flat base
Fluid Drag – Continuous
Operational temperature – -40/+60°C Celsius
CARTONI LAMDA 50 NODAL HEAD
The multi award-winning Lambda 50 nodal head is the only support that allows to set the nodal position with any camera and pivoting 360° on the focal plan of the camera. The settings are achieved by graduated slides both horizontally and vertically with micrometric cranks for extreme precision. Movements are assisted by a 7 steps fluid system + “0” on all axis. A smart system of orientable counterweight rods can be used when the slide run is not sufficient to set the center of gravity (CG) and match the nodal point. The Lambda 50 head can be mounted on any classic support as tripods or dollies or used in underslung position from Cranes and Jib arms. Optional accessories as hard case, 3rd Axis, steering wheel, eyepiece holder and additional counterweight rods complete the most versatile of camera supports.
Weight – 21 kg/ 46 lbs
Maximum Payload Capacity – 50 kg/ 110 lbs
Bowl Diameter – Flat
Fluid Drag – 7 steps + 0
Tilt Range – +/-65°
Operational temperature – -40°/+60° Celsius
CARTONI LAMDA 50 THIRD ACCESS
The 3rd Axis for Lambda 50 adds the roll axis to the classic nodal head. The Lambda 50 3rd Axis is mounted in replacement of the Lambda 50 camera stage, creating 3 independent rotation axis for pan, tilt and roll. The precision cranks adjusting the slide allow the nodal setting to be combines on all 3 axis.
It includes an additional 7 steps + zero fluid drag unit and a rod with counterweight to compensate off-set positions.
Weight – 15.5 kg/ 34 lbs
Maximum Payload Capacity – 40 kg/ 88 lbs
Bowl Diameter – Plate
Fluid Drag – 7 steps + 0
Tilt Range – 360°
Operational temperature – -40°/+60° Celsius
CARTONI TOTAL DUTCH
The Total Dutch Axis: a Cartoni patented new revolutionary tool to add a 3rd Axis lateral rotation to any classic heavy duty pan and tilt head. Allows unprecedented 360 ° rotation for extraordinary creative shots. The rotation is driven by a steering wheel pierced in the centre for cable channel. The camera plate is short to fit the inversion of the camera slide. The Total Dutch head is available as a complete product ready to be installed on top of any head via two 3/8 “ screws, or can be composed with Lambda 25 3rd Axis plus the camera stage of the Lambda 25 head. Two 1 kg (2.2 Lbs) counterweights complete the set for true nodal rotation around the optical centre.
Weight – 10.5 kg/ 23 lbs
Maximum Payload Capacity – 25 kg/ 55 lbs
Bowl Diameter – Flat base
Fluid Drag – Continuous
Operational temperature – -40/+60°C Celsius
CAS SpiderGrips Complete
CAS Spidergrips handset complete with left and right side 6 in. length standard extension bars, 15mm studio rod and 15mm LWS mini rod center bracket.
Weight:
1lb, 15 oz.
Box dimensions:
2 x 6 x 8 in. (collapsed)
Ceco Geared Wedge
The Geared wedge allows for extra tilt function, camera quick release ability, and balance adjustment for long lenses or off center configurations.
Weight:
12 lb
Dana Dolly
Designed for the times where you just want to do a little 6′ to 8′ dolly move without a lot of setup. The Dana Dolly is easy to set up, can be used with a variety of track options, and can be supported using standard junior stands, apple boxes, or the ground, whatever the shot requires.
Whether you’re an established professional or just getting started, the Dana Dolly is a great solution for adding production value to your shoot. Designed to be flexible, affordable, and easy to set up. Designed by a key grip with over 20 years’ experience in all types of production, the design is both simple and practical. The Mitchell Mount can take all types of camera heads with available adapters. The sixteen- wheel design with floating trucks provides a smooth glide. The track ends and center support can use any 1 1/4″ pipe as a track: aluminum, stainless steel, etc. So if you’re on location and don’t want to pack track, you can stop by a homecenter and pick up some pipe or conduit as an alternative to the Schedule 80 aluminum pipe we recommend for everyday use.
Dana Dolly Portable Track
Each schedule 80 pipe is made from durable aluminum, measures 39″ in length and 1.25″ in diameter, and features threading on each end to interconnect and create a longer track to support your original Dana Dolly. The carry bag features individual sleeves for each track and includes a removable shoulder strap and a carry handle.
Overall Length – Not Specified by Manufacturer
Number of Sections – 6
Section Length – 39″ / 99.06 cm
Diameter – 1.25″ / 3.17 cm
Rail Material – Aluminum
DJI Osmo Pocket 3 Creator Combo
Capture steady and smooth motion videos with the DJI Osmo Pocket 3. Boasting a wide range of upgrades over its predecessor, the Osmo Pocket 3 features a 1″ CMOS sensor with full-pixel fast focusing, ensuring high-quality, low-noise footage acquisition even in high-contrast environments and with resolutions up to UHD 4K120. Three built-in microphones capture stereophonic sound while reducing ambient noise, and new software enhancements bring ActiveTrack 6.0 to your fingertips for precise subject tracking in both photo and video modes with smart horizontal and vertical shooting modes as well as D-Log M and 10-bit support.
| Image Sensor | |
| Image Stabilization |
| Focal Length | |
| Maximum Aperture | |
| Minimum Focus Distance | |
| Field of View |
| Internal Recording | |
| Still Image Support | |
| Audio Recording | |
| IP Streaming |
| Shutter Speed | |
| ISO/Gain Sensitivity | |
| White Balance |
| Wireless | |
| Mobile App Compatible | |
| Media/Memory Card Slot | |
| Inputs/Outputs |
| Battery Type | |
| Charging Time | |
| Estimated Battery Life |