Showing 46–60 of 106 resultsSorted by average rating
Ronford-Baker 150 Baby
This baby (short), heavy-duty tripod is designed to support large, complex camera systems or rigs utilizing heavy optics. Features a Mitchell base for easy mounting of tripod heads.
Key Highlights:
Short, heavy-duty tripod
1′ 8″ to 3′ (min./max. height)
~200 lb max. payload
Ronford-Baker 150 STD
The Ronford-Baker Heavy Duty Tall Tripod (150mm Bowl) delivers reliable and secure support for complex and heavy camera systems. The 150mm bowl ensures fluid heads/cameras are secured to the tripod, while 1″ tubes provide firm support from minimum to maximum height.
Height: With legs spread at 1’6” (45.7cm): closed 3ft’ (91.4cm), fully extended 5’6” (167.6cm)
Weight: 14lb (6.5kg)
WEAVER STEADMAN 3-AXIS
The Weaver/Steadman incorporates modular design with a tube frame construction that provides a lightweight, yet sturdy base for fluid camera moves. Can be mounted upright or in underslung position for the ultimate flexibility. Easy to configure and balance. This system allows for extreme tilts, extreme low angles and nodal point configurations.
Payload 120 lb
Worral Geared Head
The particular head pictured is LT-1-1060 ser. 244. It has two speed transmissions for both pan and tilt. It features a trimable 5/8ths threaded (springed plunging) pin to attach the camera with, and has a mitchell mount for attaching to support. The control wheels are detachable for transport and both gear sets can be totally disengaged to reduce the risk of damage in transport. The head can manage weights up to 200lbs, with the camera properly balanced on the head.
The worrall is useful as a nodal head, which means the center axis of tilt is above the head in the area of the camera. For certain types of precision photography positioning the camera’s aperture in the nodal position is desirable. Also, the radius around the nodal point lends itself to balancing different sizes of cameras. A fully loaded Mitchell BNCR will not rock back from an extreme tilt up or down. It is balanced so that the tilts are smooth and under no pressure from the weight of the camera. To get this same effect with a smaller camera either elevated weights would have to added above the camera or a smaller nodal head would have to be used.
A major advantage to using a geared head is the precision with which cameras moves can be duplicated. By expressing camera moves in terms of number of rotations of the pan and tilt controls moves can be copied precisely from take to take. This method also makes for smooth pans on animation sets, where the pan can be broken into fractions of a rotation for each frame.
Flowtech 75 Aktiv
Work faster whatever the conditions with the Sachtler flowtech®75 aktiv Carbon Fibre tripod; optimised for enhanced performance and speed with the advanced Sachtler aktiv fluid head. The unique flowtech design allows you to deploy and adjust in the time it takes to release a single catch.
Being able to quickly set up and level a shot in any environment and terrain gives you more time to be creative and get the perfect shot. The Sachtler flowtech® 75 aktiv MS carbon fibre tripod’s mid-level spreader and rubber feet mean that each leg extends or retracts independently of the other two. Each leg has an individual clamping mechanism so that you can loosen and lock them from a single location near the 75 mm bowl. This deployment speed is paired with an easy to use ergonomic, lightweight design that can follow into the most intense environments.
SPECS:
Payload – 44.1 lb
Bowl Size – 75 mm
Spreader Type – Mid-level spreader
Material – Carbon Fibre
Transport Length – 26.8 in
Tripod Stages – 2
Weight – 7.7 lb
Height Range Without Spreader – 10.2 in to 60.2 in
Height Range With Mid Spreader – 24.8 in to 61.8 in
Weight Without Spreader – 6.4 lb
OCONNOR 30L
With the 30L Carbon Fiber Tripod OConnor replaces the legacy 25L & 35L lines of tripods. Combining the benefits of new-age materials with precision engineering has created a support system which is both lightweight, yet solid and stable, an ideal fit for the new generation of smaller new Ultimate 1030D & 1030Ds Fluid Heads.
At just 8.8 lbs (4 kg) the 30L’s double extension design ensures it can safely and stably carry payloads of up to 209 lbs (95 kg) even at its maximum height of 63.4″ (161 cm). And the 30L is versatile. Despite its generous height range, it folds down to a mere 29.5” (75 cm) for convenient travel. A smart quick clamping system offers secure and visible tripod lockdown. The system’s integral spreader system offers easy trouble-free security. Removable rubber feet expose spikes for optimal traction and payload safety on a variety of surfaces.
OConnor’s new 30L tripod system features an expanded payload range in a lightweight package that makes it the perfect companion for the new 1030D and 1030Ds Ultimate Fluid Heads.
Type – 2-Stage Tripod
Material – Carbon Fiber
Capacity – 209 lbs. (95 kg)
Weight – 8.8 lbs (4 kg) tripod only
Maximum Height – 61.8 in. (157 cm)
Minimum Height – 22 in. (56 cm)
Top Casting – 100 mm Ball Base
Collapsed Length – 29.5 in. (75 cm)
Includes – Mid-Leg spreader, Set of 3 Rubber feet
OCONNOR 1030D FLUID HEAD
The Oconnor Ultimate 1030D Fluid Head Is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn think about the differences between fluid heads. The head supports 30 pounds worth of camera and accessories at a C.O.G. (center of gravity) 6 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own, and to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1030D is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1030D extremely versatile, and suitable for use with heavy ENG style cameras all the way down to lightweight cameras, while maintaining the same operational feel.
Camera Plate Features – Sliding Balance Plate
Base Mount – 100 mm Half Ball
Counter Balance – Continuous
Bubble Level – 1 x Illuminated
Drag Control – Tilt: Continuous/ Pan: Continuous
Vertical Tilt – +90° to -90°
Panning Range – 360°
Independent Pan Lock – Yes
Independent Tilt Lock – Yes
Load Capacity – 30 lb / 13.6 kg
Weight – 8.7 lb / 3.9 kg
SACHTLER CINE 30 HD FLUID HEAD
The Sachtler 3006 Cine 30 HD Fluid Head is a fluid head with a 150mm half ball with an integrated flat base that allows you to use this head with a tripod with either a 150mm bowl base or flat base. It features a side-load sliding camera plate mechanism. Unlike traditional sliding baseplates that require you to slide the camera plate into the head, the side load mechanism allows you to snap the camera into the head, and still slide the plate forward and back to adjust the balance of the camera on the head. This is especially useful when the camera is weighed down with accessories. It is compatible with ARRI and OConnor camera plates, and it features a fine adjustment for a tight, secure fit.
Camera Plate Features – Quick Release, Sliding Balance Plate
Base Mount – 150 mm Half Ball
Counter Balance – Incremental 18-Step
Load Capacity – 77.2 lb / 35 kg
Drag Control – Tilt: 7-Step Plus 0/ Pan: 7-Step Plus 0
Vertical Tilt – +90° to -75°
Panning Range – 360°
Independent Pan Lock – Yes
Independent Tilt Lock – Yes
Load Capacity – 77.2 lb / 35 kg
OCONNOR CINE HD BABY
The CINE HD tripod is the perfect choice for heavy payloads that must be supported in a safe and reliable manner.
Material – Aluminium
Capacity – 309 lbs. (140 kg)
Weight – 18.5 lbs. (8.4 kg) (with Spreader)
Maximum Height – 34.6 in. (87.9 cm)
Minimum Height – 4 in. (10.2 cm)
Top Casting – 150 mm
OCONNOR CINE HD
The CINE HD tripod is the perfect choice for heavy payloads that must be supported in a safe and reliable manner.
Material – Aluminium
Capacity – 309 lbs. (140 kg)
Weight – 29.3 lbs. (13.3 kg) (with Spreader)
Maximum Height – 69.2 in. (175.8 cm)
Minimum Height – 33.6 in. (85.3 cm)
Top Casting – 150 mm
CAMGEAR ELITE 18 FLUID HEAD
The Elite 18 supports payloads up to 55.1 lb and features an 8+10-step counterbalance system with 8-step drag control for smooth pans and tilts.
The touch-and-go platform includes a quick release plate, and it has a sliding range of 4.33″ to help balance your camera rig.
Bowl Diameter
100 mm
Material
Aluminum
Maximum Payload
25 kg / 55.12 lbs
Weight
10.52 kg / 23.19 lbs
Height Range
57 cm-174 cm / 22.4 inch-68.5 inch
Transport Length91 cm / 35.8 inch
SACHTLER AKTIV 8 TRIPOD SYSTEM
The aktiv8 flowtech75 MS Tripod System from Sachtler pairs the activ8 fluid head with the lightweight, carbon fiber flowtech 75 MS tripod with mid-level spreader. This kit offers lightning fast SpeedSwap technology, a sideload camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for camera rigs weighing up to 26.5 lb. A padded carrying bag rounds out this tripod kit.
Camera Plate Features – Sideload, Sliding Balance Plate
Camera Plate Type – Sideload Plate
Camera Mounting Screw – 1 x 1/4″-20 Male/ 1 x 3/8″-16 Male
Balance Plate Sliding Range – 4.7″ / 120 mm
Safety Lock – Yes
Plate Dimensions – 5.5 x 2″ / 140 x 50 mm
Base Mount – 75 mm Half Ball/ Sachtler SpeedSwap
Counter Balance – Continuous 15-Step Plus 0
Pan Handle Fittings – 2 x Rosette
Included Pan Handle Length – 16.9″ / 430 mm
Bubble Level – 1 x Illuminated
Drag Control – Pan: Stepped 7-Step Plus 0/ Tilt: Stepped 7-Step Plus 0
Drag Type – Fluid
Vertical Tilt – +90° to -70°
Panning Range – 360°
Independent Pan Lock – Yes
Independent Tilt Lock – Yes
Schulz Tiltplate HD
The SCHULZ TILTPLATE HD offers the possibility to fix and secure the tripod head of your choice in seven different positions of inclination up to a 90 degree angle. An auto-locking device provides for reliable security when transporting and handling the plate.
When folded together for transportation or storage, the measurements of the tiltplate are 150 mm x 330 mm, with a weight of only 3,5 kg.
The SCHULZ TILTPLATE HD is made of high-density anodized aluminium. All screws and axes are made of stainless steel.
Anti-slipping rubber inlays on top of the plate guarantee a firm mounting for equipment screwed on the top.
Even when the locking device is opened accidentally, a safety device ensures the plate does not fold completely, but stops automatically in the next of the seven locking positions.
J.L. Fisher Jib Model 23
Can Be built to 7 different lengths!
The Model 23 Jib is a stable, yet lightweight sectional arm used for Features, Television, Commercials, Music Videos, and Live Productions. The Jib sections are ergonomic, easy to handle and assemble quickly. Color-coded, pre-tensioned cables secure the assembled sections into an extremely rigid Jib. The Model 23 Jib rotates 360 degrees and enables the operator to position the camera at various elevations from –9 ft 4 in to 20 ft 7 in high.
The Model 23 can be used on the Model 9 and 10 camera dollies with a center mount and 18 in RJ18 Heavy Duty Riser.
The Model 23 should not be used with the Model 11 Dolly.
-The Model 23 Jib sections, cables and parts store conveniently in compartments in a self-contained utility cart.
-Four weight carts are provided for easy transportation of weights and other accessories.
-The Jib can be configured in 3 foot increments from 6’ (1.83m) to 21’ (6.4m).
-Support cables are pre-adjusted to the proper length and color coded for easy assembly.
-Assembly instructions for all lengths and safety guidelines included.
-All required parts for all 7 lengths are included in the Utility Cart.
J.L. Fisher Jib Model 22
They are smooth, quiet and easy to set up, with the J.L. Fisher reputation for being well constructed and easily maintained. All jib arms come complete with weight carts, leveling offsets and angle plates.
Max payload with std. weights is
124 lbs (56 kg)
Max payload with XRW weights is
175 lbs ( 80 kg)
Max height on 10 Dolly Center Mount 11ft 5in (3.5m)
Model 22 on ALL Dollies requires Center Mount