Element Technica Mantis-I Handheld Kit
A shoulder mounting solution for film and digital motion picture cameras.
It includes a shoulder pad and dovetail, a crossbar, and a universal handle kit.
Length Contracted:
9″ (23 cm)
Extended: 14″ (35.6 cm)
Rosette Type
ARRI standard
eMotimo Spectrum ST4 Pro
The Spectrum ST4 + Fz Pro from eMotimo adds FIZ control to the ST4 Motion Control Pan & Tilt Head. This robust aluminum head supports a maximum equipment load of 15 lb and includes a 3.9″ forward/back adjustment plate for proper camera balance. Head features include smooth ramping, the ability to set up to seven keyframes, and 11 preset moves ranging from a quiet interview to turbo mode. This motion control head features accurate move repetition, even at high speeds.
FilmAir 45 Deg. Curved 24-1/2″ Dolly Track
The hi-load curved dolly track is constructed of anodized structural aluminum and designed to carry maximum loads with minimum deflection.
The inner and outer rails are in contact with the ground along their entire length preventing any flexing between cross bars.
Therefore, the load carrying capacity is rated in excess of two tons. Eight of these curved sections are needed to make up a circle, which has a 20 ft. (6.0 m) outside diameter.
Overall Length
91.2″ (2316 mm)
Width
32.4″ (823 mm)
Weight
22.5 lbs. (10 kg)
FilmAir 90 Deg. Curved 24-1/2″ Dolly Track
The hi-load curved dolly track is constructed of anodized structural aluminum and designed to carry maximum loads with minimum deflection.
Flexing between crossbars is prevented as the rails are in contact with the ground along their entire length. Therefore, the load carrying capacity is rated in excess of two tons. Four of these curved sections are needed to make up a circle, which has a 14 ft. (4.2 m) outside diameter.
Overall Length
119″ (3018 mm)
Width
43.2″ (1097 mm)
Weight
29.5 lbs. (13.5 kg)
FilmAir Hi-load Aluminum 24-1/2″ Dolly Track
Hi-load swing fold dolly track is constructed of anodized structural aluminum, and designed to carry maximum loads with minimum deflection. The track rails are flush with the ground, and thus supported along their entire length preventing any flexing between crossbars.
The load carrying capacity of this track is rated in excess of two tons fitted with precision machined stainless steel cones and connectors for corrosion proof durability and maintenance free use.
This track is light enough to carry to any location but rugged enough to survive the heaviest usage and proven by time to sustain less than 20% of damage recorded on heavier steel track.
Std. Lengths
2 ft. (607 mm)
4 ft. (1219 mm)
6 ft. (1829 mm)
8 ft. (2439 mm))
10 ft. (3048 mm)
Weight Length
8.5 lbs. (3.9 kg)
13.5 lbs. (6.1 kg)
19.5 lbs. (8.9 kg)
23 lbs. (10.6 kg)
28.5 lbs. (13 kg)
FilmAir Starter Ramp for 24″ Dolly Track
The starter ramp for hi-load dolly track is constructed of anodized structural aluminum fitted with precision machined stainless steel cones and connectors, for corrosion proof durability.
Overall Length
27.6″ (701 mm)
Width
26.4″ (671 mm)
Weight
6.5 lbs. (3 kg)
Filmtools Converted Magliner Cart / Junior or Senior
6061-T6 Aluminum Alloy Frame with Stainless Steel Rivets
5 Cross Bars on Frame for Added Strength
24″ x 36″ Removable Top Shelf/Attached Lower Shelf
(2) 8″ 4-Ply Tires and (2) 10″ 4-Ply Tires
U- Bar is Removable and can be Repositioned
Cart can be used as a 2- Wheeled Hand Truck
30″ Heavy Duty Nose can be folded Flat When Not in Use
In an upright (collapsed) position: 51 1/2″ H x 25 1/8″ W x 14″ L
Assembled (4 wheels position): 44 1/8″ H x 25 1/8″ W x 47 1/2″ L
Weight – 130lbs
Flowtech 75 Aktiv
Work faster whatever the conditions with the Sachtler flowtech®75 aktiv Carbon Fibre tripod; optimised for enhanced performance and speed with the advanced Sachtler aktiv fluid head. The unique flowtech design allows you to deploy and adjust in the time it takes to release a single catch.
Being able to quickly set up and level a shot in any environment and terrain gives you more time to be creative and get the perfect shot. The Sachtler flowtech® 75 aktiv MS carbon fibre tripod’s mid-level spreader and rubber feet mean that each leg extends or retracts independently of the other two. Each leg has an individual clamping mechanism so that you can loosen and lock them from a single location near the 75 mm bowl. This deployment speed is paired with an easy to use ergonomic, lightweight design that can follow into the most intense environments.
SPECS:
Payload – 44.1 lb
Bowl Size – 75 mm
Spreader Type – Mid-level spreader
Material – Carbon Fibre
Transport Length – 26.8 in
Tripod Stages – 2
Weight – 7.7 lb
Height Range Without Spreader – 10.2 in to 60.2 in
Height Range With Mid Spreader – 24.8 in to 61.8 in
Weight Without Spreader – 6.4 lb
Inovativ Apollo 40 EVO Cart
The Apollo 40 EVO Cart from Inovativ can be used on set, in the studio, or on location to transport your cinema equipment. It can also function as a mobile workstation for data management operators. The cart can be configured to hold several monitors, a laptop, or a camera. The rigid and stable internal main frame supports 1200 lb, and the cart is constructed with 5052 and 6061 aluminum with stainless steel hardware. All machined parts are type II and III anodized with a black powder-coated top and bottom shelves. The dual-purpose top shelf has a drop-down lip that can be used as a workstation for your computer keyboard, or you can leave it up to prevent equipment from sliding off. The top shelf also has three built-in threaded rail plates, each with twenty-two 3/8″-16 and ten 1/4″-20 threaded holes to mount different accessories. Optional drawers are available to attach to the top and bottom shelves of the cart. No tools are required to assemble the cart because it has a Corner Cam Lock System, which enables you to disassemble the cart and fold it down to a 7.5″ tall trunk with all the parts and wheels inside.
J.L. Fisher Jib Model 20
They are smooth, quiet and easy to set up, with the J.L. Fisher reputation for being well constructed and easily maintained. All jib arms come complete with weight carts, leveling offsets and angle plates.
Max payload with std. weights is
132 lbs (60 kg)
Max payload with XRW weights is
148 lbs ( 83 kg)
Max height on 10 Dolly beam is 8ft 6 in (2.6m)
Max height on 10 Dolly Center Mount 8ft 3 in (2.5m)
Model 20 on 9 or 10 Dollies with payload over 100 lbs requires Center Mount and on 11 Dolly always requires Center Mount
J.L. Fisher Jib Model 21
They are smooth, quiet and easy to set up, with the J.L. Fisher reputation for being well constructed and easily maintained. All jib arms come complete with weight carts, leveling offsets and angle plates.
Max payload with std. weights is
118 lbs (54 kg)
Max payload with XRW weights is
164 lbs ( 74 kg)
Max height on 10 Dolly beam is 9ft 6 in (2.9m)
Max height on 10 Dolly Center Mount 9ft 4 in (2.8m)
Model 21 on 9 or 10 Dollies with payload over 100 lbs requires Center Mount and on 11 Dolly always requires Center Mount
J.L. Fisher Jib Model 22
They are smooth, quiet and easy to set up, with the J.L. Fisher reputation for being well constructed and easily maintained. All jib arms come complete with weight carts, leveling offsets and angle plates.
Max payload with std. weights is
124 lbs (56 kg)
Max payload with XRW weights is
175 lbs ( 80 kg)
Max height on 10 Dolly Center Mount 11ft 5in (3.5m)
Model 22 on ALL Dollies requires Center Mount
J.L. Fisher Jib Model 23
Can Be built to 7 different lengths!
The Model 23 Jib is a stable, yet lightweight sectional arm used for Features, Television, Commercials, Music Videos, and Live Productions. The Jib sections are ergonomic, easy to handle and assemble quickly. Color-coded, pre-tensioned cables secure the assembled sections into an extremely rigid Jib. The Model 23 Jib rotates 360 degrees and enables the operator to position the camera at various elevations from –9 ft 4 in to 20 ft 7 in high.
The Model 23 can be used on the Model 9 and 10 camera dollies with a center mount and 18 in RJ18 Heavy Duty Riser.
The Model 23 should not be used with the Model 11 Dolly.
-The Model 23 Jib sections, cables and parts store conveniently in compartments in a self-contained utility cart.
-Four weight carts are provided for easy transportation of weights and other accessories.
-The Jib can be configured in 3 foot increments from 6’ (1.83m) to 21’ (6.4m).
-Support cables are pre-adjusted to the proper length and color coded for easy assembly.
-Assembly instructions for all lengths and safety guidelines included.
-All required parts for all 7 lengths are included in the Utility Cart.
Kessler Crane CineSlider
The CineSlider from Kessler Crane is a belt-driven, heavy-duty camera slider supporting up to 80 lb, and this model measures a total length of 60.5″, it has a total weight of 12 lb, and a travel distance of 51″. The slider is made of reinforced aluminum, and the slide rails are on the inside, where they’re better protected.
Losmandy Standard Porta-Jib
Designed to carry up to 100 lbs. (45kg) of camera and fluid head weight, this is the most versatile of all lightweight jibs. Assembles in less than 5 minutes. No tools required. All parts are machined aluminum and stainless steel. Boom and pan lock included. Front inserts available for all standard fluid heads: 100mm, 150mm, Mitchell.
Camera Capacity: 100 lbs.
Reach/Pan Radius: 57″
Vertical Movement: 72″
Pull Back: 19″
Weight Ratio: 1:1.22
Weight: 45 lbs.