Showing 16–30 of 106 resultsSorted by price: high to low
Doorway Dolly
The Doorway Dolly will move through a full range of travel with either the Push Bar or Pull Bar. Load it with gear to get to the location with ease! The platform can be flipped over for even lower camera positioning. Ground clearance is 9″ or 3″ when inverted. The removable side boards add an extra 10″ per side for increased platform width.
Easyrig Vario 5 with STABIL G3 (Standard Vest)
An adjustable, body-worn support system for camera rigs weighing 11 to 38 lb. This system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles and distributing it across your torso.
This system consists of the standard-size Gimbal Rig vest with the EASYLOCK ratcheting buckle, a standard top support bar for shoulder mounting, a quick release camera mount, and a STABIL G3 dampening arm to reduce walking motion in your footage.
Stabilizer Type
Vest System
Load Capacity
11 to 37.5 lb / 5 to 17 kg
Camera Mount
Quick Release
Additional Mount
1/4″-20 Female
Height
40.6 to 44.5″ / 103 to 113 cm
24.4″ / 62 cm
Depth
12.2″ / 31 cm
8.7″ / 22 cm (Folded)
Weight
12.1 lb / 5.5 kg
Counterweights
None
Vest Weight
5.3 lb / 2.4 kg
Belt Size
31 to 51″ / 78.7 to 129.5 cm
Suspension Line Length
35.4″ / 90 cm
Easyrig Mini Strong
The Easyrig Mini Strong Camera Support supports from 9 to 13 lbs of camera weight, relieves the strain of that weight from your arms, and leaves you only with the job of maneuvering the camera in desired directions.
Load Capacity
9 – 13 lbs (4 – 6 kg)
Suspension Line Length
39″ when fully stretched (99 cm)
Max Waist Hip Strap Length
55″ (140 cm)
Dimensions
Mounted height: 37″ (94 cm)
Folded: 22 x 11 x 7.5″ (56 x 28 x 19 cm)
Weight
7.3 lbs (3.3 kg)
ARRI Master Grip
With a form factor based on the classic ARRI handgrips, the Master Grips add flexible and responsive fingertip control for handheld shooting.
Aimed at ALEXA, AMIRA, and third-party camera operators, the Master Grips can also be mounted on tripod pan handles, and on pedestal heads for controlling cameras in studio or multicamera setups.
Control Features
Start/Stop Recording
Iris Control
Focus Control
Control Input
2 x LEMO 4-Pin (LBUS)
Attachment Method
ARRI/Hirth Rosette
Power Consumption
12 to 34 VDC at 30 mA
Weight
13.4 oz / 380 g
SHAPE SHOULDER PAD
The Shape Composite Shoulder Pad is for the Shape F3 Composite Support Rig and intended for use with larger-sized cameras such as the F3, EX1, and P2hd, whereas for DSLRs and the C300, the Adjustable Composite Shoulder Pad or the Mini Composite Shoulder Pad would be better.
Camera Comfort Cushion
The 7.5 x 7.5″ Camera Comfort Cushion from Alan Gordon Enterprises was developed to help eliminate common upper extremity disorders and musculoskeletal injuries associated with carrying cameras.
This cushion is designed to give maximum flexibility and comfort suited to the needs of the camera operator. The cushion works with a variety of camera sizes, from shoulder-mounted camcorders to broadcast-sized and film cameras.
Materials
Top: 2 mm Neoprene
Bottom: Non-Slip Neoprene Mesh
Strap Length
Underarm Strap: Up to 23″ / 58.4 cm
Chest Strap: Up to 47″ / 119.4 cm
Pocket
Pad Pocket: 7.5 x 4.5″ / 19.05 X 11.43 cm
Closure Type
Pad Pocket Closure: 7″ / 17.8 cm Zipper
Inserts
0.75″ / 1.9 cm Rubber Insert
0.06″ / 0.15 cm Plastic Insert
0.25″ / 0.63 cm Foam Insert
Dimensions
7.5 x 7.5″ / 19.05 x 19.05 cm
Weight
7 oz / 198 g
SmallRig Shoulder Pad
Switch between handholding your cinema camera and mounting it on a separately available VCT-14 tripod adapter plate.
The Shoulder Pad Pro features a durable aluminum baseplate, and a comfortable, integrated silicone shoulder pad allows you to handhold your camera for long periods.
Rod Standard
15 mm LWS / 60 mm Spacing
Battery Plate Type
None
Accessory Mounting
Baseplate: Multiple x 1/4″-20 Female Thread
Camera Mounting
Manfrotto 501 Plate with 1/4″-20 Male Screw, 3/8″-16 Male Screw
Tripod Mounting
Baseplate: V-Lock, VCT-14
Rod Ports
Baseplate, Front: 2 x 15 mm Rod Port
Baseplate, Rear: 2 x 15 mm Rod Port
Rosettes
2 x ARRI Rosette w/ M6 Female Thread
Materials
Aluminum, Silicone
Dimensions
9.9 x 3.9 x 2″ / 25.1 x 9.8 x 5.1 cm
Weight
1.6 lb / 740 g
Element Technica Mantis-I Handheld Kit
A shoulder mounting solution for film and digital motion picture cameras.
It includes a shoulder pad and dovetail, a crossbar, and a universal handle kit.
Length Contracted:
9″ (23 cm)
Extended: 14″ (35.6 cm)
Rosette Type
ARRI standard
TANGO I SWING HEAD
The TANGO is a convenient third axis: whatever fluid or geared head is chosen, the panoramic movement remains horizontal and the tilt stays vertical.
The maneuvering of the fluid or gear head remains unchanged. The twin support and racks add further advantages to TANGO such as silence, steadiness and flexibility when moving your camera, and a locking position range of 90° degrees.
Weight:
10 pounds
Spidergrips Adjustable Extension Bar
Adjustable extension bar with M6 accessory thumb knob, uses high strength stainless steel travel-rods with an extension range of over 3 inches.
Weight: 10.7 oz.
Spidergrips 6 in. length extension bar
Spidergrips right/Left side 6 in. length extension bar with M6 accessory thumb knob
Interchangeable with SP-LEX
M6 Accessory Thumb knob (thumb-knob item #SP-K6M) for use with Spidergrips Preston Microforce adapter bracket or Spidergrips On/Off Module
Weight:
4.5 oz.
Redrock MicroHandGrip (Blue)
A rubberized handgrip with an integrated all-metal rod clamp and thumb screw to provide a comfortable, non-slip handle.
Attaches to 15mm rod/rail support systems such as Redrock’s micro Shoulder Mount and its DSLR support rigs.
Attachment Method
Attaches via Rod Ports
Rod Standard
15 mm Single Rod
Rod Ports
1 x 15 mm Rod Port
Accessory Mounting
None
Shoe Mounting
None
Rosettes
None
Rail Mounting
None
100mm Hi-Hat
The cast iron 100mm Hi-Hat works with any fluid head that has a 100mm ball base.
The hi hat comes mounted on a hi hat board that has cut corners (octagon shape) in order to fit into tighter spaces
Each leg has a 1/4″ hole for easy mounting to wood or metal plates.
Weighs
2.05 pounds.
Sachtler CF-100ENG Tripod
The CF 100 ENG HD 2CF two stage, heavy-duty tripod, provides maximum stability and carrying capacity.
Constructed and drawn out of one-piece of carbon fiber material, it is twist resistant and lighter than dural aluminum. It features a 100mm / 4″ bowl, tube diameter of 24mm (0.94″) for extra stability, and is fitted with the Sachtler quick clamping system, so you can securely and visibly lock the tripod.
Head Mount Type
100 mm Bowl
Maximum Working Height
61.8″ / 156.972 cm
Minimum Working Height
20.1″ / 51.054 cm
Closed Length
28.4″ / 72.136 cm
Materials
Carbon Fiber
Weight
9.5 lb / 4.31 kg
Sachtler Flowtech 75 MS Carbon Fiber Tripod
The Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 7 pounds yet they can support a payload of up to 44 pounds, and extend from a minimum height of 24″ to a maximum height of 61″ when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.
Load Capacity
44.1 lb / 20 kg
Head Mount Type 75 mm Bowl
Maximum Working Height
60.24″ / 153 cm (without Spreader)
Max Height without Center Column
60.2″ / 153 cm (without Spreader)
Minimum Working Height
10.24″ / 26 cm (without Spreader)
Closed Length
26.8″ / 68 cm
Materials
Aluminum, Carbon Fiber
Operating Temperature
-40 to 140°F / -40 to 60°C
Weight
6.4 lb / 2.9 kg
Leg Lock Type
Flip Lock
Leg Positions
3 Positions
Independent Leg Spread
Yes
Leg Sections
3
Bubble Level
None
Feet Features
Rubber, Removable, Spiked
SpreaderMid-Level, Ground (Included)