Manfrotto Hi Hat
The Manfrotto 529 Hi Hat with 100mm Bowl facilitates shots from the very low positions. The feet are rubber padded to protect delicate surfaces and have a hole so that it can be screwed down to a ladder, apple box, or sheet of plywood.
Material
Aluminum
Load Capacity
44 lb (20 kg)
Maximum Height
7.68″ (19.5 cm)
Minimum Height
5.7″ (14.5 cm)
Center Column
None
Leg Sections
1
Leg Cross Section
Round
Leg Tube Diameters
19 mm
Head Fixing
100 mm
Weight
5.95 lb (2.7 kg)
Matthews Brauer Hostess Tray
The Brauer Hostess Tray Kit from Matthews allows for mounting of film and video cameras to a car’s side door for shooting profile shots through a window. The Brauer kit adjusts with the window’s up/down movement, and also allows for the vehicle door to be opened and closed without restrictions. This lets your talent conveniently enter and exit the vehicle without requiring your grip to constantly set up and tear down the car mount. It is compatible with nearly any camera and gimbal stabilization system, and includes a 10 x 14″ aluminum cheese plate that slips between the window and door of nearly any vehicle, securely attached to the side of the car by vacuum cups, 5/8″ rods, grip heads, and quick struts.
Matthews Monitor Stand II
The Monitor Stand II from Matthews has a minimum working height of 29″ and rises to a maximum height of 75″.
The stand will support gear weighing up to 70 lb and is easily moved thanks to its 3″ casters. The Monitor Stand II also has an adjustable rocky mountain leg to level the stand on uneven terrain.
Stand Type : 1 x General Purpose Stand
Maximum Working Height: 75″ / 191 cm
Minimum Working Height: 29″ / 74 cm
Load Capacity: 70 lb / 31.8 kg
Mounting
Stand/Column Top Mount: 5/8″ Stud
Features
Accepts Second Riser: No
Wheels: Built-In
Air Cushioned: No
Detachable Base: No
Leveling Leg: Yes
Reverse Legs: No
General
Footprint Diameter: 31″ / 78 cm
Finish: Black
Material: Chrome
Weight: 17 lb / 7.7 kg
Matthews Pump Cup – 6″ Suction Cup
Pump it up to create an amazing bond to non porus surfaces. It has a fixed 5/8 in stud. Will support up to 5 lbs (2.3 kg).
Mitchell Hi-Hat on Octagon Board
This high hat features three keyways making it quicker to align the head’s locating key to the high hat. In addition if one of the high hat’s keyways becomes damaged, you can still mount your tripod head using one of the other two keyways and continue shooting. The pre-drilled mounting holes in the high hat’s support feet make it easy to attach the high hat to structures for long-term projects.
Head Attachment Fitting
Standard Mitchell
3 x Keyways
Material of Construction Aluminum with a powder coated finish
Mountable
Pre-drilled Holes
3 x 3/8″ non tapped
One hole in each of the high hats support feet
Height
4.5 ” (11.4 cm)
Mitchell Lo-Hat on Octagon Board
This mount is constructed from high-strength, heat-treated aluminum and can be used as a Mitchell interface when constructing specialized rigs and setups. This Low Hat Mount comes with 3 Mitchell keys for easier set-up, and all three legs have mounting holes for securing it to a mounting board.
Compatibility
Mitchell Base Heads 2065, 2575D, 120EX
Model 10 Dolly
Recognized as the industry standard, the Model 10 Dolly is manufactured from the highest quality materials and components to meet the demanding needs of the motion picture, television and video industries.
This stable, reliable Dolly offers operators versatile features and a wide variety of accessories. The Model 10 Dolly is smooth, quiet and easy to use, with a reputation for being safe, well-made and low maintenance.
Model 11 Dolly
The Model 11 is the smallest Fisher Dolly. Lightweight and compact, it is built with the same high quality standards found in all J.L. Fisher products. The Model 11 Dolly shares the same controls and characteristics of the Model 10 Dolly and has a complete line of its own accessories. It operates effortlessly on track, making the Model 11 and Model 10 an excellent two dolly combination.
The Model 11 Dolly is engineered and manufactured to meet the demanding production needs of the motion picture, television and video industries. Compact size, three-way steering and a solid lift beam give operators a wide variety of options. The reliable, quiet, smooth and safe Model 11 requires minimal maintenance.
MYT Works Medium Glide Camera Slider
MYT Works Glide Camera Sliders are designed for smooth motion and precise starts and stops. They support up to the largest cameras in various modular setups, and offer the durability to withstand extended wear and tear and extreme weather. You can safely use them in harsh environments, like dusty deserts, humid rainforests, and dry tundras. They’re made in New York City and machined from industrial-grade steel and aluminum. This Medium Glide Camera Slider is 5′ long and features a 100mm bowl. It has 10mm double extrusion rails with a 7″ span between them and supports up to 80 lb loads.
Nodo Film Systems Inertia Wheels MAX 3-Azis Pro Kit
The NODO Inertia Wheels MAX 2-Axis is a wireless long-range digital camera controller featuring proprietary, patented MAX Inertia Motors™ inside the wheels. Operators can use both mass and drag to help both creatively and technically to achieve difficult and creative shots. The Inertia Wheels are compatible with Freefly MōVI, DJI Ronin, and more gimbals. The controller has dual-band, long-range 400-950MHz+2.4GHz wireless communication beyond 1 mile with a fast refresh rate of 100Hz. Optional hardwire connection of up to 2000ft. Our kit includes an Ignite Digi battery plate to create the ultimate power solution for Inertia Wheels that includes regulated ports for accessories, leverages the power of TB50 batteries, and adds hot-swapping with block batteries. The Inertia Wheels MAX include the same advanced, long-range, full-duplex dual 800-900MHz and 2.4GHz radios for up to 1-mile wireless range. Where other wheels fail, the Inertia Wheels radios have achieved legendary status amongst drone pilots and professionals all over the world.
Features:
- High Torque Solid State PCB Motors
- Patented Adjustable Weighted Wheels
- Wireless Long-Range Camera Controller
- Compatible with DJI Ronin, MōVI and many more
- Optional 3rd Axis Wheel
- 1 Mile Wireless Range
- 2000ft Cabled Range
- 10ms latency
- Transmit on 434MHz, 868MHz, 915MHz
- Receive on 2.4GHz
- Built-in frequency scanner
Input/Output:
- Power: 10-35v DC Lemo Port
- Data: 2x UART Lemo Ports
- Hardwire: 4-Pin Molex
- Micro USB 2.0
- Ignite Digi Battery Plate for DJI TB50 Battery
Inertia Wheels MAX Compatibility:
- DJI Ronin (1, 2, M, MX, RS, RS2)
- Freefly MōVI (Pro, XL)
- Arri Trinity 1 / Maxima*
- eMotimo ST4
- Inspire 2*
- Shotover*
- Newton Nordic*
- Kessler Cineshooter*
- Talon Head*
- Defy EX Camera*
- Filmotechnic Heads*
- Virtual Production: Cinetracer, Unreal Engine, Cinema4D
- NODO Training Software
* Requires additional hardware for support.
OCONNOR 1030D FLUID HEAD
The Oconnor Ultimate 1030D Fluid Head Is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn think about the differences between fluid heads. The head supports 30 pounds worth of camera and accessories at a C.O.G. (center of gravity) 6 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own, and to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1030D is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1030D extremely versatile, and suitable for use with heavy ENG style cameras all the way down to lightweight cameras, while maintaining the same operational feel.
Camera Plate Features – Sliding Balance Plate
Base Mount – 100 mm Half Ball
Counter Balance – Continuous
Bubble Level – 1 x Illuminated
Drag Control – Tilt: Continuous/ Pan: Continuous
Vertical Tilt – +90° to -90°
Panning Range – 360°
Independent Pan Lock – Yes
Independent Tilt Lock – Yes
Load Capacity – 30 lb / 13.6 kg
Weight – 8.7 lb / 3.9 kg
OCONNOR 1030D TRIPOD SYSTEM
The Oconnor Ultimate 1030D Fluid Head Is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn think about the differences between fluid heads. The head supports 30 pounds worth of camera and accessories at a C.O.G. (center of gravity) 6 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own, and to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1030D is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1030D extremely versatile, and suitable for use with heavy ENG style cameras all the way down to lightweight cameras, while maintaining the same operational feel.
Camera Plate Features – Sliding Balance Plate
Base Mount – 100 mm Half Ball
Counter Balance – Continuous
Bubble Level – 1x Illuminated
Drag Control – Tilt: Continuous/ Pan: Continuous
Vertical Tilt – +90° to -90°
Panning Range – 360°
Independent Pan Lock – Yes
Independent Tilt Lock – Yes
Load Capacity – 30 lb / 13.6 kg
Weight – 8.7 lb / 3.9 kg
OCONNOR 2065 MITCHELL BASE FLUID HEAD
The OConnor Ultimate 2065 Fluid Head Package (Mitchell) includes a long European-style camera platform with a quick release plate, a two-piece pan handle, a Mitchell base, and a tie-down. Designed as a replacement for the 2060HD, the 2065 Fluid Head has an increased payload of up to 89 pounds and shares many ergonomic features with higher payload contemporaries like the OConnor 2575 and 120EX. This head features infinitely variable counterbalance with a crank-style handle, stepless pan and tilt drag, a soft left-hand rest, and a single-handed platform release with a safety catch.
Camera Plate Features – Sliding Balance Plate, Quick Release
Base Mount – Mitchell Flat Base
Counter Balance – Continuous
Drag Control – 9-Step
Vertical Tilt – +90° to -90°
Load Capacity –
89 lb / 40 kg at CoG 4″ / 102 mm
71 lb / 32 kg at CoG 6″ / 152 mm
58 lb / 26 kg at CoG 8″ / 203 mm
Weight – 22.9 lb / 10.4 kg
OCONNOR 2575 MITCHELL BASE FLUID HEAD
The OConnor Ultimate 2575D Fluid Head (Mitchell) is a fluid head with a Mitchell Ball Base and Tiedown that supports high payload cameras rendering it suitable for cine style shooting. Lightweight at 22.6 lb (10.4 kg), the fluid head sustains a heavy payload up to 90 lb (40.8 kg) with greater drag. Conveniently located controls (pan and tilt brakes) at camera operator’s side (left side) of the platform enable ease of operation and rapid familiarity. The platform also houses dual scales for counterbalance, and sports 4 handle rosettes that allow left or right hand operation as well as mounting from the front or rear. An intelligently placed, soft handrest enhances the Ultimate 2575D Fluid Head’s ergonomic design. You can achieve rapid pan movements owing to the fluid drag system that allows the camera to move from one position to other very quickly and recover without any spring back. The Mitchell Ball Base provides for high mobility and is secured in place by the Mitchell Tiedown. A single-touch, Euro-style platform release lever allows you to disengage the safety catch and open the lever effortlessly, providing high mobility to deal with location changes in the field.
Counter Balance – Continuous
Load Capacity – 105 lb / 47.7 kg