Showing 31–45 of 106 resultsSorted by popularity
150mm Hi-Hat
The Cast Iron Ball/Claw Hi-Hat works with all professional fluid heads with a 150mm ball mount.
The 3 legs have holes for mounting it to a wood or metal plate. The hi hat comes mounted on a hi hat board that has cut corners (octagon shape) in order to fit into tighter spaces.
Weighs
3.25 pounds.
Manfrotto Hi Hat
The Manfrotto 529 Hi Hat with 100mm Bowl facilitates shots from the very low positions. The feet are rubber padded to protect delicate surfaces and have a hole so that it can be screwed down to a ladder, apple box, or sheet of plywood.
Material
Aluminum
Load Capacity
44 lb (20 kg)
Maximum Height
7.68″ (19.5 cm)
Minimum Height
5.7″ (14.5 cm)
Center Column
None
Leg Sections
1
Leg Cross Section
Round
Leg Tube Diameters
19 mm
Head Fixing
100 mm
Weight
5.95 lb (2.7 kg)
Mitchell Lo-Hat on Octagon Board
This mount is constructed from high-strength, heat-treated aluminum and can be used as a Mitchell interface when constructing specialized rigs and setups. This Low Hat Mount comes with 3 Mitchell keys for easier set-up, and all three legs have mounting holes for securing it to a mounting board.
Compatibility
Mitchell Base Heads 2065, 2575D, 120EX
Mitchell Hi-Hat on Octagon Board
This high hat features three keyways making it quicker to align the head’s locating key to the high hat. In addition if one of the high hat’s keyways becomes damaged, you can still mount your tripod head using one of the other two keyways and continue shooting. The pre-drilled mounting holes in the high hat’s support feet make it easy to attach the high hat to structures for long-term projects.
Head Attachment Fitting
Standard Mitchell
3 x Keyways
Material of Construction Aluminum with a powder coated finish
Mountable
Pre-drilled Holes
3 x 3/8″ non tapped
One hole in each of the high hats support feet
Height
4.5 ” (11.4 cm)
Ceco Geared Wedge
The Geared wedge allows for extra tilt function, camera quick release ability, and balance adjustment for long lenses or off center configurations.
Weight:
12 lb
Candrevaplate RA
The CANDREVAplate RA solves the problem of mounting the camera on its side and still being able to pan and tilt the camera normally.
The CANDREVAplate RA snaps into the O’Connor 2575 and allows the camera to be rigidly held on it’s side for those shots looking to utilize the best resolution of the camera’s sensor in the vertical orientation.
- Heavy-Duty L-Shaped Plate
- Mount Your Camera Vertically
- Compatible with OConnor 2575 Head
- Multiple Mounting Holes, Bubble Level
- Includes 2 Quick Release Plates
Compatibility
OConnor 2575 Head
Ronford-Baker RBQ
Multiple Heads with Euro Plate Receiver
Physical
Mounting:
9 x Pass-Through Holes
1 x OConnor 2575 Quick Release Plate
Dimensions:
8.5 x 8.13 x 4.71″ / 21.6 x 20.65 x 11.96 cm (Assembled)
8 Ball Camera Slider w/ Mitchell Base 6′
CNC Machined
All parts of the camera slider are CNC machined from billet 6061 aluminum.
Deburred
All parts of the camera slider are tumbled in a de-burring machine for approximately 2 days for a smooth finish with no sharp edges.
Assembly
The camera sliders are assembled with stainless hardware. The bearings are German and Swiss made. Parts are black anodized with a flat black color.
FilmAir Starter Ramp for 24″ Dolly Track
The starter ramp for hi-load dolly track is constructed of anodized structural aluminum fitted with precision machined stainless steel cones and connectors, for corrosion proof durability.
Overall Length
27.6″ (701 mm)
Width
26.4″ (671 mm)
Weight
6.5 lbs. (3 kg)
FilmAir 90 Deg. Curved 24-1/2″ Dolly Track
The hi-load curved dolly track is constructed of anodized structural aluminum and designed to carry maximum loads with minimum deflection.
Flexing between crossbars is prevented as the rails are in contact with the ground along their entire length. Therefore, the load carrying capacity is rated in excess of two tons. Four of these curved sections are needed to make up a circle, which has a 14 ft. (4.2 m) outside diameter.
Overall Length
119″ (3018 mm)
Width
43.2″ (1097 mm)
Weight
29.5 lbs. (13.5 kg)
FilmAir 45 Deg. Curved 24-1/2″ Dolly Track
The hi-load curved dolly track is constructed of anodized structural aluminum and designed to carry maximum loads with minimum deflection.
The inner and outer rails are in contact with the ground along their entire length preventing any flexing between cross bars.
Therefore, the load carrying capacity is rated in excess of two tons. Eight of these curved sections are needed to make up a circle, which has a 20 ft. (6.0 m) outside diameter.
Overall Length
91.2″ (2316 mm)
Width
32.4″ (823 mm)
Weight
22.5 lbs. (10 kg)
FilmAir Hi-load Aluminum 24-1/2″ Dolly Track
Hi-load swing fold dolly track is constructed of anodized structural aluminum, and designed to carry maximum loads with minimum deflection. The track rails are flush with the ground, and thus supported along their entire length preventing any flexing between crossbars.
The load carrying capacity of this track is rated in excess of two tons fitted with precision machined stainless steel cones and connectors for corrosion proof durability and maintenance free use.
This track is light enough to carry to any location but rugged enough to survive the heaviest usage and proven by time to sustain less than 20% of damage recorded on heavier steel track.
Std. Lengths
2 ft. (607 mm)
4 ft. (1219 mm)
6 ft. (1829 mm)
8 ft. (2439 mm))
10 ft. (3048 mm)
Weight Length
8.5 lbs. (3.9 kg)
13.5 lbs. (6.1 kg)
19.5 lbs. (8.9 kg)
23 lbs. (10.6 kg)
28.5 lbs. (13 kg)
Avenger Roller Stand 17 with Folding Base
The 8′ Avenger Roller Stand 17 with Folding Base is a heavy-duty, chrome-plated, steel and aluminum alloy support that features a low base for extra stability, braking wheels, two risers, and a 5/8″ Baby stud.
The legs fold up for transport and storage. It will support 26.5 lb.
Stand Type: 1 x General Purpose Stand
Maximum Working Height: 98″ / 248.9 cm
Minimum Working Height: 42.5″ / 108 cm
Load Capacity: 26.5 lb / 12 kg
Closed Length: 38.6″ / 98 cm
Mounting
Stand/Column Top Mount: 5/8″ Stud
Features
Accepts Second Riser: No
Wheels: Built-In
Air Cushioned: No
Detachable Base: No
Leveling Leg: No
Reverse Legs: No
General
Number of Sections: 3
Footprint Diameter: 29.53″ / 75.01 cm
Leg Shape: Rectangular
Finish: Chrome
Material: Aluminum, Steel
Weight: 12 lb / 5.4 kg
Matthews Monitor Stand II
The Monitor Stand II from Matthews has a minimum working height of 29″ and rises to a maximum height of 75″.
The stand will support gear weighing up to 70 lb and is easily moved thanks to its 3″ casters. The Monitor Stand II also has an adjustable rocky mountain leg to level the stand on uneven terrain.
Stand Type : 1 x General Purpose Stand
Maximum Working Height: 75″ / 191 cm
Minimum Working Height: 29″ / 74 cm
Load Capacity: 70 lb / 31.8 kg
Mounting
Stand/Column Top Mount: 5/8″ Stud
Features
Accepts Second Riser: No
Wheels: Built-In
Air Cushioned: No
Detachable Base: No
Leveling Leg: Yes
Reverse Legs: No
General
Footprint Diameter: 31″ / 78 cm
Finish: Black
Material: Chrome
Weight: 17 lb / 7.7 kg
Tripod DA 100 K
Bowl size: 100 mm
Material: Aluminum
Transport length: 220 mm
Height With Ground Spreader: 130 to 270 mm
Weight without spreader: 1.50 kg