Show sidebar
Filters
Quick view

17″SONY PVM-A170

The PVM-A170 17-inch, Full HD monitor achieves the industry-leading
lightweight and shallow body*, with an approximately 40 per cent reduction
compared to the previous PVM-1741A model. It is easy to carry, even by one
person. The PVM-A170 incorporates the TRIMASTER EL™ OLED panel and
offers the industry’s widest viewing angles of any professional flat-panel
monitor on the market, making group monitoring easy. The stylish new
design also includes a, robust, optional protection panel and corner
bumpers**. The latest camera-linkage functions, such as camera and lens
metadata display and a Picture and Picture function, provide the convenience
of working efficiency both in the field and in the post process. Version 2.0 of
the PVM-A170 expands and enhances the monitor’s ability to support 4K
production, shopping channels, field and graphics applications.
Specs
● Picture Performance
○ Panel: OLED panel
○ Picture Size (Diagonal): 419.7 mm (16 1/2 inches)
○ Effective Picture Size (H x V): 365.8 x 205.7 mm (14 1/2 x 8 1/8 inches)
○ Resolution (H x V): 1920 x 1080 pixels (Full HD)
○ Aspect: 16:9
○ Panel Drive: RGB 10-bit
○ Viewing Angle (Panel Specification): 89°/89°/89°/89° (typical)
(up/down/left/right contrast > 10:1)
● Input
○ Composite Input: BNC (x1), 1.0 Vp-p ±3dB sync negative
○ SDI: Input BNC (x2)
○ HDMI Input: HDMI (x1) (HDCP correspondence)
○ Audio Input: Stereo mini jack (x1), -5 dBu 47 kΩ or higher
○ Parallel Remote: RJ-45 modular connector 8-pin (x1) (Pin-assignable)
○ Serial Remote (LAN):
■ RJ-45 modular connector (x1) (Ethernet
■ 10BASE-T/100BASE-TX)
○ DC Input: XLR-type 4-pin (male) (x1) DC 12 V to 16 V (output impedance
0.05 Ω or less)
● Output
○ Composite Output:
■ BNC (x1)
■ Loop-through, with 75 Ω automatic termination
○ SDI Output:
■ BNC (x2)
■ Output signal amplitude: 800 mVp-p ±10%
■ Output impedance: 75 Ω unbalanced
○ Audio Monitor Output: Stereo mini jack (x1)
○ Speaker (Built-in) Output: 1.0 W (mono)
○ Headphone Output: Stereo mini jack (x1)
● General
○ Power Requirements:
■ AC 100 V to 240 V
■ 0.9 A to 0.5 A
■ 50/60 Hz DC 12 V to 16 V
■ 6.4 A to 4.8 A
○ Power Consumption
■ Approx. 75 W (AC power supply) (max.)
■ Approx. 60 W (AC power supply) (average power consumption in
the default status)
○ Operating Temperature:
■ 0°C to 35°C (32°F to 95°F)
■ Recommended: 20°C to 30°C (68°F to 86°F)
○ Operating Humidity: 30% to 85% (no condensation)
○ Storage / Transport Temperature: -20°C to +60°C (-4°F to +140°F)
○ Storage / Transport Humidity: 0% to 90%
○ Operating / Storage / Transport Pressure: 700 hPa to 1060 hPa
○ Dimensions (W x H x D):
■ 435.0 x 274.0 x 65.5 mm* (17 1/4 x 10 7/8 x 2 5/8 inches) (without
monitor feet),
■ 435.0 x 296.5 x 165.0 mm (17 1/4 x 11 3/4 x 6 1/2 inches) (with
monitor feet)
○ Mass:Approx. 4.2 kg(9Ib 4.2 oz)
○ Supplied Accessories:
■ AC power cord (1)
■ AC plug holder (1)
■ Handle (1) (including 4 screws)
■ Before Using This Unit (1)
■ CD-ROM (1)
○ Optional Accessories:
■ SU-561 Monitor Stand
■ MB-P17 Mounting bracket
■ BKM-PP17 Protection kit *Without projection parts.

Quick view

25″SONY PVM-2541

The PVM-2541 “All in one” OLED picture monitor delivers outstanding, full-HD RGB
10-bit driver picture quality and professional features in a lightweight, compact design.
Flexible mount options make the 25-inch monitor ideal for desktop editing, office
viewing, studio monitor walls and OB vans.
Superb picture performance
The Super Top Emission OLED display panel benefits from TRIMASTER EL technology.
It offers superb black performance, wide color gamut and quick response with virtually
no motion blur. By combining the Sony OLED display panel (Full HD, 10-bit driver) and
Sony’s OLED processing technologies, the PVM-2541 OLED monitor delivers
groundbreaking picture quality.
Accepts computer signals via HDMI
The PVM-2541 accepts various computer signals input up to 1920 x 1080 through its
HDMI connector.

● Picture Performance
○ Panel: OLED panel
○ Picture Size (Diagonal): 623.4 mm, 24 5/8 inches
○ Effective Picture Size (H x V): 543.4 x 305.6 mm, 21 1/2 x 12 1/8 inches
○ Resolution (H x V): 1920 x 1080 pixels (Full HD)
○ Aspect: 16:9
○ Pixel Efficiency: 0.9999
○ Panel Drive: RGB 10-bit
○ Viewing Angle (Panel Specification): 89°/89°/89°/89° (typical)
(up/down/left/right contrast 10:1)
○ Normal Scan: 0% scan
○ Over Scan: 5% over scan
○ Color Temperature: D65, D93, User
○ Warm-up Time: Approx. 30 minutes
● Input
○ Composite Input: BNC (x1), 1.0 Vp-p ±3dB sync negative
○ SDI Input: BNC (x2)
○ HDMI Input: HDMI (x1) (HDCP correspondence)
○ Audio Input: Stereo mini jack (x1), -5 dBu 47 kΩs or higher
○ Parallel Remote:
■ Modular connector 8-pin (x1)
■ (Pin-assignable)
○ Serial Remote (LAN): RJ-45 (x1) (Ethernet, 10BASE-T/100BASE-TX)
● Output
○ Composite Output:
■ BNC (x1)
■ Loop-through, with 75 Ω automatic termination
○ SDI Output:
■ BNC (x1)
■ Output signal amplitude: 800 mVp-p ±10%
■ Output impedance: 75 Ω unbalanced
○ Audio Monitor Output: Stereo mini jack (x1)
○ Speaker (Built-in) Output: 1.0 W (mono)
○ Headphone Output: Stereo mini jack (x1)
● General
○ Power Requirements: 100 V to 240 V AC, 1.4 A to 0.6 A, 50/60 Hz
○ Power Consumption
■ Approx. 130 W (max.)
■ Approx. 88 W (average power consumption in the default status)
○ Inrush Current
■ (1) Maximum possible inrush current at initial switch-on (Voltage
changes caused by manual switching): 40 A peak, 8 A r.m.s. (240V
AC)
■ (2) Inrush current after a mains interruption of five seconds (Voltage
changes caused at zero-crossing): 40 A peak, 8 A r.m.s. (240V AC)
○ Operating Temperature
■ 0°C to 35°C (Recommended: 20°C to 30°C)
■ 32°F to 95°F (Recommended: 68°F to 86°F)
○ Operating Humidity: 30% to 85% (no condensation)
○ Storage/Transport Temperature
■ -20°C to +60°C
■ -4°F to +140°F
○ Storage/Transport Humidity: 0% to 90%
○ Operating/Storage/Transport Pressure: 700 hPa to 1060 hPa
○ Dimensions (W x H x D) *1
■ 576.0 x 408.8 x 110.0 mm
■ 576.0 x 424.8 x 171.4 mm (with stand)
■ 22 3/4 x 16 1/8 x 4 3/8 inches
■ 22 3/4 x 16 3/4 x 6 3/4 inches (with stand)
○ Mass
■ Approx. 10.6 kg
■ Approx. 12.7 kg (with an optional SU-561 monitor stand)
■ Approx. 23 lb 5.9 oz
■ Approx. 27 lb 16 oz (with an optional SU-561 monitor stand)
○ Supplied Accessories
■ AC power cord (1)
■ AC plug holder (1)
■ Operating instructions (1)
■ CD-ROM (1)
■ Using the CD-ROM Manual (1)
○ Optional Accessories: SU-561 Monitor Stand

Quick view

25″SONY PVM-A250

The PVM-A250 25-inch, Full HD monitor achieves the industry-leading lightweight and
shallow body*, with an approximately 40 per cent reduction compared to the previous
PVM-2541A model. It is easy to carry, even by one person. The PVM-A250 incorporates
the TRIMASTER EL™ OLED panel and offers the industry’s widest viewing angles of
any professional flat-panel monitor on the market, making group monitoring easy. The
stylish new design also includes a, robust, optional protection panel and corner
bumpers**. The latest camera-linkage functions, such as camera and lens metadata
display and a Picture and Picture function, provide the convenience of working
efficiency both in the field and in the post process. Version 2.0 of the PVM-A250
expands and enhances the monitor’s ability to support 4K production, shopping
channels, field and graphics applications.
Specs
● Picture Performance
○ Panel: OLED panel
○ Picture Size (Diagonal): 623.4 mm (24 5/8 inches)
○ Effective Picture Size (H x V): 543.4 x 305.6 mm (21 1/2 x 12 1/8 inches)
○ Resolution (H x V): 1920 x 1080 pixels (Full HD)
○ Aspect: 16:9
○ Panel Drive: RGB 10-bit
○ Viewing Angle (Panel Specification): 89°/89°/89°/89° (typical)
(up/down/left/right contrast > 10:1)
● Input
○ Composite Input: BNC (x1), 1.0 Vp-p ±3dB sync negative
○ SDI: Input BNC (x2)
○ HDMI Input: HDMI (x1) (HDCP correspondence)
○ Audio Input: Stereo mini jack (x1), -5 dBu 47 kΩ or higher
○ Parallel Remote: RJ-45 modular connector 8-pin (x1) (Pin-assignable)
○ Serial Remote (LAN):
■ RJ-45 modular connector (x1) (Ethernet
■ 10BASE-T/100BASE-TX)
● Output
○ Composite Output:
■ BNC (x1),
■ Loop-through, with 75 Ω automatic termination
○ SDI Output:
■ BNC (x2),
■ Output signal amplitude: 800 mVp-p ±10%, Output impedance: 75
Ω unbalanced
○ Audio Monitor Output: Stereo mini jack (x1)
○ Speaker (Built-in) Output: 1.0 W (mono)
○ Headphone Output: Stereo mini jack (x1)
● General
○ Power Requirements: AC 100 V to 240 V, 1.3 A to 0.6 A, 50/60 Hz
○ Power Consumption:
■ Approx. 115 W (max.),
■ Approx. 80 W (average power consumption in the default
status)
○ Operating Temperature:
■ 0°C to 35°C (32°F to 95°F),
■ Recommended: 20°C to 30°C (68°F to 86°F)
○ Operating Humidity: 30% to 85% (no condensation)
○ Storage / Transport Temperature: -20°C to +60°C (-4°F to +140°F)
○ Storage / Transport Humidity: 0% to 90%
○ Operating / Storage / Transport Pressure: 700 hPa to 1060 hPa
○ Dimensions (W x H x D):
■ 581.0 x 386.6 x 65.5 mm* (22 7/8 x 15 1/4 x 2 5/8 inches)
(without monitor feet),
■ 581.0 x 409.1 x 165.0 mm (22 7/8 x 16 1/8 x 6 1/2 inches)
(with monitor feet)
○ Mass: Approx. 6.1 kg (13 lb 7.2 oz)
○ Supplied Accessories:
■ AC power cord (1),
■ AC plug holder (1),
■ Before Using This Unit (1),
■ CD-ROM (1)
○ Optional Accessories: SU-561 Monitor Stand, BKM-PP25 Protection kit

Quick view

5″TRANSVIDEO ARRI STARLIGHT OLED

The innovative Transvideo StarliteHD5-ARRI from ARRI is a combination
monitor/recorder offering touchscreen control of your ALEXA Mini, or AMIRA camera.
This 5″ OLED monitor records in H.264, provides 3G/HD/SD-SDI input and output, and
is compatible with ARRI LDS, Cooke /i, and ZEISS eXtended lens metadata.
StarliteHD5-ARRI features include SD card recording, playback, a snapshot feature,
image flip, reverse mode, PDF-report generation, and 1.3x and 2x anamorphic
de-squeeze functions. Peaking, and a 1:1 pixel-to-pixel zoom can be used to check your
focus. Display tools include a dynamic zoom zone, and smart corner-assignable
waveform, histogram, and vectorscope functions.
The StarliteHD5-ARRI’s connectors are placed at an angle, enabling them to remain
recessed behind the monitor’s clean, rectangular outer edge. An articulated arm,
power/data cable, 3′ BNC cable, and hard carrying case are included with the monitor.
Specs
● Video
○ Video In: 3G/HD/SD-SDI: 1 x BNC
○ Video Out: 3G/HD/SD-SDI: 1 x BNC (reclocked)
○ Supported Video Standards
■ 3G: 1080p: 60/50
■ HD: 1080p: 30/25/24, 1080PsF: 25/24, 1080i: 60/50, 720p:
60/50/30/25
■ SD: 525: 60i, 625: 50i
○ Recording Codec: H.264
● Display
○ Display Panel: 5″ AMOLED touchscreen
○ Pixels: 1280 x 720
○ Contrast Ratio: 3400:1
○ Viewing Angle (H x V): ±80 x 80°
○ Brightness: 380 cd/m²
○ Color Temperature: D56
● Recording Media
○ SD Card Requirements:
■ Type: SDSC/SDHC/SDXC
■ Maximum Size: 128 GB
■ File Format: FAT32
■ Speed Class: 10
● Power
○ Power Input: 6-30 VDC, 5-pin LEMO-type
○ Power Consumption: 6 W
○ Battery Type: Sony L-series
● Mechanical
○ Material of Construction: Machined aluminum
○ Mounting Thread: 1/4″-20
○ Dimensions: 5.67 x 2.68 x 1.06″ / 144 x 68 x 27 mm
○ Weight: 7.1 oz / 200 g
● Packaging Info
○ Package Weight: 3.7 lb
○ Box Dimensions (LxWxH): 9 x 7 x 4.1″

Quick view

7″ SMALL HD 703 BOLT LCD

The 703 Ultrabright On-Camera Monitor is built for every environment, featuring a
daylight viewable screen, durable design, professional software toolset, and five user
function buttons. The 703 Ultrabright is made of an aluminum housing with optically
bonded gorilla glass display, making this one of the most durable monitors in the field.
Thanks to 2,200 nits of brightness and HDR preview, projects can be viewed in
color-accuracy in full sunlight. So no matter the time of day or environment, you can
guarantee a glare-free look at your production. This seven-inch monitor has a resolution
of 1800p and features HDR Preview with a 10-Bit ColorEngine. And despite being one
of our brightest seven-inch monitors available, the 503 maintains low power
consumption. Load any 3D LUT via SD card using SmallHD’s ColorFlow 3D LUT
engine.
The 703 Ultrabright features both a 3G SDI and HDMI input, a 3G SDI and HDMI
output, and two locking 2-pin Connectors, one for power input and one for power
distribution to an external device. In addition to 2-pin power, Gold Mount, V-Mount, and
Sony L-Series battery plates are available separately.
Specs
● Display
○ Panel Type: LTPS LCD
○ Diagonal Size: 7.02
○ Resolution: 1920 x 1080
○ Pixel Density: 323 ppi
○ Aspect Ratio: 16:9
○ Active Area: 7.02
○ Max Brightness: 2200 nits
○ Contrast: 1200:1
○ Gamut: 100% Rec 709
○ Color Depth: 10-Bit Color Intelligence Engine
○ Viewing Angle: 178 Degrees (CR<10) ○ Backlight Type: White LED ○ Adjustable Backlight: Yes ● Input Signal ○ 3G-SDI Input Types: ■ YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50 ○ HD-SDI Input Types: ■ YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98 ○ SD-SDI Input Types: ■ YCC 4:2:2 @ 10-bits: 480i29.97, 576i25 ○ HDMI Input Types: ■ YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i60, 1080i59.94, 1080i50, 1080i30, 1080i29.97, 1080i25, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p60, 480p59.94, 576p100, 576p50, 480i240, 480i239.76, 480i120, 480i119.88, 480i60, 480i59.94, 480i30, 480i29.97, 480i24, 480i23.98, 576i200, 576i100, 576i50, 576i25 ○ Audio Input Types ■ HDMI & SDI - Monitor through Speakers in Front Bezel or Through Headphone Jack - Metering up to 8 channels ● Output Signal ○ 3G-SDI Output Types ■ YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50 ○ HD-SDI Output Types ■ YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98 ○ SD-SDI Output Types ■ YCC 4:2:2 @ 10-bits: 480i29.97, 576i25 ○ HDMI Output Types ■ YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i60, 1080i59.94, 1080i50, 1080i30, 1080i29.97, 1080i25, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p60, 480p59.94, 576p100, 576p50, 480i240, 480i239.76, 480i120, 480i119.88, 480i60, 480i59.94, 480i30, 480i29.97, 480i24, 480i23.98, 576i200, 576i100, 576i50, 576i25 ○ Audio Output Types ■ HDMI & SDI - Incoming Audio Stream is sent downstream via HDMI or SDI connection ○ Connector Type ○ SDI:1x 3g Input, 1x 3g Output ○ HDMI:1x Input, 1x Output ○ Component: Not Supported ○ Composite: Not Supported ○ Audio:1x ⅛” Headphone Jack ○ Power In: 1x Locking 2-pin Connector ○ Power Out: 1x Locking 2-pin Connector for Power distribution to an external device (Requires Power Input) ○ USB: 1x Micro USB ● Controls ○ Primary: Joystick Navigation, Dedicated Back/Power Button. 5 Additional User Assignable Function Buttons ○ Data I/O: ■ Storage Media: SD Card for LUTs, Captured Images, Image Overlays, Firmware Upgrades, Profile Saving. ■ USB: USB port supports storage devices for LUTs, Captured Images, Image Overlays, Profile Saving. ● Power ○ Connector: ■ 2x Locking 2-pin Connectors: 1 for Power Input ■ 1 for Power distribution to an external device (Requires Power Input) ○ Voltage: With DV Battery Plate: 6.0 - 8.4V 7.2V Nominal With High Voltage Battery Plate: 12 - 34V 14.4V Nominal With Input: 12 - 34V Max ○ Consumption: 10-12 Watts ○ Power Supply: Included ○ Overload Protection: Yes ○ Output Voltage: Mirrors Input Voltage

Quick view

5″ SMALL HD 503 ULTRA BRIGHT

The 503 Ultrabright On-Camera Monitor, a monitor built for every environment, features
a daylight viewable screen, durable design, professional software toolset, and two user
function buttons. The 503 Ultrabright is made of a mill aluminum housing with optically
bonded gorilla glass display, making this one of the most durable monitors in the field.
Thanks to 2,200 nits of brightness and HDR preview, projects can be viewed in
color-accuracy in full sunlight. So no matter the time of day or environment, you can
guarantee a glare-free look at your production. This five-inch monitor has a resolution of
1800p and features HDR Preview with a 10-Bit ColorEngine. And despite being one of
our brightest five-inch monitors available, the 503 maintains low power consumption.
Load any 3D LUT via SD card using SmallHD’s ColorFlow 3D LUT engine.
The 503 Ultrabright features both a 3G SDI and HDMI input, a 3G SDI and HDMI
output, and two locking 2-pin Connectors, one for power input and one for power
distribution to an external device. In addition to 2-pin power, Gold Mount, V-Mount, and
Sony L-Series battery plates are available separately.
● Display
○ Panel Type: IPS LCD
○ Diagonal Size: 5
○ Resolution: 1920 x 1080
○ Pixel Density: 443 ppi
○ Aspect Ratio: 16:9
○ Active Area: 4.9
○ Max Brightness: 2200 nits
○ Contrast: 1000:1
○ Gamut: 100% Rec 709
○ Color Depth: 10-Bit Color Intelligence Engine
○ Viewing Angle: 170 degrees Typical
○ Backlight Type: White LED
○ Adjustable Backlight: Yes
● EVF
○ Variable Field of View: range
● Input Signal
○ 3G-SDI Input Types
■ YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60,
1080i59.94, 1080i50
○ HD-SDI Input Types
■ YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24,
1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24,
1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94,
720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
○ SD-SDI Input Types
■ YCC 4:2:2 @ 10-bits: 480i29.97, 576i25
○ HDMI Input Types
■ YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4:
1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25,
1080p24, 1080p23.98,1080i60, 1080i59.94, 1080i50, 1080i30,
1080i29.97, 1080i25, 720p120, 720p119.88, 720p100, 720p60,
720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24,
720p23.98, 480p120, 480p119.88, 480p60, 480p59.94, 576p100,
576p50, 480i240, 480i239.76, 480i120, 480i119.88, 480i60,
480i59.94, 480i30, 480i29.97, 480i24, 480i23.98, 576i200, 576i100,
576i50, 576i25
○ Audio Input Types
■ HDMI & SDI – Monitor through Speakers in Front Bezel or Through
Headphone Jack – Metering up to 8 channels
● Output Signal
○ 3G-SDI Output Types
■ YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60,
1080i59.94, 1080i50
○ HD-SDI Output Types
■ YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24,
1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24,
1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94,
720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
○ SD-SDI Output Types
■ YCC 4:2:2 @ 10-bits: 480i29.97, 576i25
○ HDMI Output Types
■ YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4:
1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25,
1080p24, 1080p23.98,1080i60, 1080i59.94, 1080i50, 1080i30,
1080i29.97, 1080i25, 720p120, 720p119.88, 720p100,
720p60,720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24,
720p23.98, 480p120, 480p119.88, 480p60, 480p59.94, 576p100,
576p50, 480i240, 480i239.76, 480i120, 480i119.88, 480i60,
480i59.94, 480i30, 480i29.97, 480i24, 480i23.98, 576i200, 576i100,
576i50, 576i25
○ Audio Output Types
■ HDMI & SDI – Incoming Audio Stream is sent downstream via
HDMI or SDI connection
● Connector Type
SDI: 1x 3g Input, 1x 3g Output
○ HDMI: 1x Input, 1x Output
○ Component: Not Supported
○ Composite: Not Supported
○ Audio: 1x ⅛” Headphone Jack
○ Power In: 1x Locking LEMO 2-pin Connector
○ USB: 1x Micro USB
● Controls
○ Primary: Joystick Navigation, Dedicated Back/Power Button. 2 Additional
User Assignable Function Buttons
● Data I/O
○ Storage Media: SD Card for LUTs, Captured Images, Image Overlays,
Firmware Upgrades, Profile Saving.
○ USB: USB port supports storage devices for LUTs, Captured Images,
Image Overlays, Profile Saving
● Power
○ Connector: 1x Locking LEMO 2-pin Connectors: for Power Input
○ Voltage: With DV Battery Plate: 6.0 – 8.4V 7.2V Nominal With High
Voltage Battery Plate: 12 – 34V 14.4V Nominal With Lemo Input: 12 – 34V
Max
○ Consumption: 11 watts
○ Power Supply: Included
○ Overload Protection: Yes

Quick view

TV LOGIC F-7H

The F-7H is a 7-inch field Full HD resolution(1920×1080) production monitor with
ultra-high luminance of 3,600nit. The F-7H provides SDI <-> HDMI cross conversion
with 1 SDI input, 1 SDI output, 1HDMI input and 1 HDMI output interfaces. It also
supports all the professional features such as Waveform & Vectorscope, Audio Level
Meters, Focus Assist, Range Error, Time Code Display, various Aspect Ratio and
Makers, 3D LUT import, Camera Logs and HDR emulation including HDR EOTFs of
PQ, HLG and SLog3.
Specs
● Display
○ Size: 7″
○ Resolution: 1920 X 1080 (16 : 9)
○ Pixel Pitch: 0.078(H) X 0.078(V)mm
○ Color Depth: 16.7M
○ Viewing Angle: 160°(H) / 160°(V)
○ Luminance: 3,600cd/m2
○ Contrast Ratio:1200:1
○ Display Area: 151.2(H) × 94.5(V) mm
● Input
○ 1 X BNC: 3G-SDI Input
○ 1 X HDMI: HDMI Input
● Output
○ 1 X BNC: 3G-SDI Output
○ 1 X HDMI: HDMI Output
● Input Signal
○ 3G SDI: 2.970Gb/s
○ HD SDI: 1.485Gbps
○ SD SDI: 270Mbps
○ HDMI: 1080p (24/25/30/50/60)/1080i(50/60)/720p(50/60)/
480i(60)/480p(60)/576i(50)/576p(50) & VESA/IBM Modes
● SDI Input Signal Formats
○ SMPTE 425M-A/B 1080p (60/59.94/50/30/29.97/25/24/23.98/30sF
/29.97sF/25sF/24sF/23.98sF) / 1080i(60/59.94/50)
○ SMPTE 296 720p (60/59.94/50)
○ SMPTE 274 1080i (60/59.94/50) 1080p
(30/29.97/25/24/24sF/23.98/23.98sF)
○ SMPTE 260 1035i (60/59.94)
○ SMPTE 125 480i (59.94)
○ ITU-R BT.656 576i (50)
○ 2K Format 2048 x 1080p (24/24sF/23.98/23.98sF)
● Audio
● Audio In: Embedded Audio
● Audio Out: Analog Stereo (Phone Jack)
● FPGA Functions
● 3G-SDI Level A/B, Audio Level Meter Display, Blue Only, Focus Assist, H/V
Delay, H/V Flip, Key Lock, Luma(Y’) Zone Check, Marker, Max Brightness
On/Off, Mono, Range Error, Time Code Display, User Aspect, Various Scan
Modes, Waveform/Vector, Zoom, Camera Lut., Arri Camera Metadata

Quick view

TV LOGIC LVM-074W

The LVM-074W features a high-resolution (1024×600) 7” LED backlit LCD panel housed in lightweight (600 grams) yet durable magnesium alloy case.

An ideal monitor for the latest compact cinema cameras, the LVM-074W offers a wide range of professional features including: Waveform/Vectorscope, built-in HDMI to HD-SDI conversion output, Horizontal and Vertical Image Flip, Focus Assist, Audio Level Meter and more.

A feature unique to the LVM-074W is TVLogic’s new user selectable Temperature Adaptive Color function that measures LCD panel temperature and automatically compensate the white balance drift caused by a cold or hot weather.

Product Highlight
• 7” 1024 x 600 (16:9) Resolution
• White LED Backlight
• Matte Finish Panel
• Hard-Coated Acrylic Filter
• Max Brightness On / Off
• Supports TVLogic Color Calibration Utility for proper color alignment
• Waveform/Vectorscope
(Y/Cb/Cr, Wide Type, Line Waveform, Full Size)
• GPI (RJ45)
• Timecode Display
• Range Error
• Marker
• User Aspect
• Blue Only/Mono
• H/V Delay
• Focus Assist
• H/V Flip
• Luma(Y’) Zone Check
• Zoom
• 3G-SDI Level A/B
• UMD support (ANC, Manual, Dynamic & hUser)
• Closed Caption: CEA-608/708 (SDI)
• Monitor control using RS422
• Magnesium Housing, Light Weight
• External Tally (Option)
• Temperature Adaptive Color
• HDMI-to-SDI conversion output
• HDMI-to-HDMI Active Loop Through
• SDI-to-SDI Active Loop Through

Specs:
Size – 7″
Resolution – 1024 x 600 (16: 9)
Pixel Pitch – 0.15mm
Color Depth – 16.7M (True 8bit)
Viewing Angle (Typ.) – 170°(H) / 170°(V)
Luminance (Max.) – 400cd/m / 1.500cd/m2 (SRM-074W-N)
Contrast Ratio – 800:1
Display Area – 154(H) × 90/V) mm

Input – 1 x HDMI/ 3x RCA/ 2x BNC
Output – 1 xBNC/ 1 x HDMI

Input Signal – Analog (CVBS / S-Video / Component Video / RGB(D-TV))/ 1x HDMI/ 3G-SDI/ HD-SDI/ SD-SDI/ HDMI
(1080p (24/ 25/ 30/ 50/ 60)/ 1080i(50/ 60)/ 72Op(50/ 60)/ 4801(60)/ 480p(60)/ 576(50)/ 576p(50)

Quick view

TV LOGIC VFM-055A

The VFM-055A is a 5.5-inch OLED (organic LED) on-camera viewfinder monitor with native 1920×1080 resolution. It offers truly cinematic image quality with deep blacks, wide-gamut color reproduction, a very wide viewing angle, and support for multiple video formats via 3G-SDI and HDMI 1.4 inputs. Useful functions include cinema camera log-to-linear LUT conversion, HDMI-SDI cross-converted output options.

Display Specs:
Size – 5.5″
Resolution – 1920 X 1080 (16 : 9)
Pixel Pitch – 0.063mm
Color Depth – 16.7M
Viewing Angle – 160°(H) / 160°(V)
Luminance – 350cd/m2
Contrast Ratio – 17000 : 1
Display Area – 121(H) × 68(V) mm

Input
1 X BNC – 3G-SDI Input
1 X HDMI – HDMI Input

Output
1 X BNC – 3G-SDI Output
1 X HDMI – HDMI Output

Input Signal
3G SDI – 2.970Gb/s
HD SDI – 1.485Gbps
SD SDI – 270Mbps
HDMI – 1080p (24/25/30/50/60)/1080i(50/60)/720p(50/60)/ 480i(60)/480p(60)/576i(50)/576p(50) & VESA/IBM Modes

SDI Input Signal Formats
SMPTE 425M-A/B 1080p (60/59.94/50/30/29.97/25/24/23.98/30sF /29.97sF/25sF/24sF/23.98sF) / 1080i(60/59.94/50)
SMPTE 296 720p (60/59.94/50)
SMPTE 274 1080i (60/59.94/50) 1080p (30/29.97/25/24/24sF/23.98/23.98sF)
SMPTE 260 1035i (60/59.94)
SMPTE 125 480i (59.94)
ITU-R BT.656 576i (50)
2K Format 2048 x 1080p (24/24sF/23.98/23.98sF)

Audio
Audio In Embedded Audio
Audio Out Analog Stereo (Phone Jack)

FPGA Functions
3G-SDI Level A/B, Audio Level Meter Display, Blue Only, Focus Assist, H/V Delay, H/V Flip, Key Lock, Luma(Y’) Zone Check, Marker, Max Brightness On/Off, Mono, Range Error, Time Code Display, User Aspect, Various Scan Modes, Waveform/Vector, Zoom, Camera Lut, Arri Camera Metadata

Quick view

TV LOGIC VFM-058

The VFM-058W, the lightweight viewfinder monitor, offers an outstanding picture quality with 5.5” LCD, and Full HD resolution of 1920 x 1080. Innovative and ergonomic design of VFM-058W makes you comfortable in the shooting environment and its light solid magnesium case achieves the highest efficiency of ventilation. The VFM-058W supports multi-formats including 3G/HD/SD-SDI and HDMI that offers a wide application range from DSLR cameras to Pro camcorder for broadcasting and movie shooting. The VFM-058W has various features such as Max Brightness function, Temperature Adaptive Color, HDMI-to-SDI conversion output, 1:1 pixel mode, Luma(Y’) Zone Check function, DSLR Scale, Waveform, Camera Lut., Arri Camera Metadata, Vectorscope, Range Error, Focus Assist, Markers, Audio Level Meter with speaker and time code display.

Display Spec
Size 5.5″
Resolution 1920 X 1080 (16 : 9)
Pixel Pitch 0.063mm
Color Depth 16.7M
Viewing Angle 160°(H) / 160°(V)
Luminance 450cd/m2
Contrast Ratio 1,000:1
Display Area 121(H) × 68(V) mm

Input
1 X BNC 3G-SDI A Channel Input
1 X HDMI HDMI Input

Output
1 X BNC 3G-SDI Output
1 X HDMI HDMI Output

Input Signal
3G SDI 2.970Gb/s
HD SDI 1.485Gbps
SD SDI 270Mbps
HDMI 1080p (24/25/30/50/60)/1080i(50/60)/720p(50/60)/ 480i(60)/480p(60)/576i(50)/576p(50) & VESA/IBM Modes

SDI Input Signal Formats
SMPTE 425M-A/B 1080p (60/59.94/50/30/29.97/25/24/23.98/30sF /29.97sF/25sF/24sF/23.98sF) / 1080i(60/59.94/50)
SMPTE 296 720p (60/59.94/50)
SMPTE 274 1080i (60/59.94/50) 1080p (30/29.97/25/24/24sF/23.98/23.98sF)
SMPTE 260 1035i (60/59.94)
SMPTE 125 480i (59.94)
ITU-R BT.656 576i (50)

Audio
Audio In Embedded Audio/Analog Stereo (Phone Jack)
Audio Out Analog Stereo (Phone Jack), Internal Speaker(Mono)

FPGA Functions
G-SDI Level A/B, Audio Level Meter Display, Blue Only, Focus Assist, H/V Delay, H/V Flip, Key Lock, Luma(Y’) Zone Check, Marker, Max Brightness On/Off, Mono, Range Error, Temperature Adaptive Color, Time Code Display, User Aspect, Various Scan Modes, Waveform/Vector, Zoom, Camera LUT, Arri Camera Metadata

Quick view

TERADEK BOLT PRO 3000 HDMI _ SDI

With highly refined software, new wireless radios, and a redesigned chassis, these models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included.

Product Highlights:
-Replacement for Transmitter
-Wirelessly transmit visually lossless 1080p60 Video/Audio up to 3000 ft
–< 0.001 seconds latency -Rapid Reconnect & Real-Time Frequency Adjustment -Multicast up to 4 Receivers -Support camera metadata, timecode, and start/stop flags

Quick view

TERADEK XT 3000 WITH HDMI & SDI

The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility.

A key feature of the Bolt XT is its backward compatibility with any Bolt of the same range, Sidekick II / LT / XT, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.

Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. This XT line has several 1/4”-20 and 3/8” mounting points.

Product Highlights
– Compatible with 3rd generation Bolt 3000, Sidekick II, and 703 Bolt
– Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection
– Dual input (SDI + HDMI) and SDI loop on the TX
– HDMI and Dual 3G-SDI outputs on RX