Revar Cine 4 x 5.65 138mm Rota Wave Filter

The 4 x 5.65″ 138mm Rota Wave Filter from Revar Cine is a geared filter tray designed from aircraft-grade aluminum and poly materials to interface with the latest 4 x 5.65″ matte boxes on the market today. This geared tray allows for the use of the special effect wave filter in a rectangular 4 x 5.65″ matte box filter tray.

High-quality anodized aluminum frame.
Dual 0.8 MOD gears for fast rotation in any camera configuration including remote with a focus motor.
138mm filter allows the use of wide-angle lenses for maximum compatibility.
Featuring high-quality melted glass for a wave effect.
Drop the 4 x 5.65″ standard width tray into your matte box and use your fingers to spin the wheel to control the wave filter from the operator or the dumb side of the camera.

Specs

Filter Type
Wave
Size
4 x 5.65″ / 101.6 x 143.5 mm
Front Accessory Thread / Bayonet
138 mm
Coating
No
Filter Material
Glass
Ring Material
Aluminum

Rode NTG-2 Shotgun Microphone

Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG2 shotgun microphone. With low handling noise, the ability to endure loud sound sources before distortion, and support for battery or phantom power, the NTG2 offers a versatile, cost-effective solution for recording clean dialogue and sound effects.

SPECS:
Form Factor – Stand/Boom Mount
Intended Sound Sources – Vocals
Sound Field – Mono
Operating Principle – Line Gradient
Element Type – Condenser
Polar Pattern – Supercardioid

Frequency Range – 20 Hz to 20 kHz
Maximum SPL – 131 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection – 14 dB at 60°/ 16 dB at 120°/ 12 dB at 180°
Sensitivity – -36 dBV/Pa at 1 kHz
Dynamic Range – 113 dB
Signal-to-Noise Ratio – 76 dB A-Weighted (1 kHz)

Power Sources – Battery/ Phantom Power
Operating Current Consumption – 2 mA (Phantom Power)/ 0.18 mA (Battery Power)

Rode VideoMic Pro Camera-Mount Shotgun Microphone

Offering lower noise, higher sensitivity, and more adjustable settings than the VideoMic, the Rode VideoMic Pro camera-mount shotgun microphone is ideal for mobile journalists, vloggers, budget filmmakers, and run-and-gun shooters looking for a cost-effective way to step up to the next level in quality.

SPECS:
Form Factor – Stand/Boom Mount
Sound Field – Mono
Operating Principle – Line Gradient
Element Type – Electret Condenser
Polar Pattern – Supercardioid
Orientation – End Address
Circuitry – Solid-State (JFET)
On-Board Controls – Gain/Sensitivity, High-Pass Filter, On/Off

Frequency Range – 40 Hz to 20 kHz
Maximum SPL – 134 dB SPL
Off-Axis Rejection – 2 dB at 60°/ 18 dB at 120°/ 10 dB at 180°
Sensitivity – -32 dBV/Pa at 1 kHz
Dynamic Range – 120 dB
Signal-to-Noise Ratio – 80 dB

Power Sources – Battery
Approximate Battery Life – 70 Hours

SENNHEISER EW 112P G4 WIRELESS MIC KIT

The Sennheiser EW 112P G4 camera-mount wireless lavalier microphone system features the proven combination of reliability, flexible control, and broadcast-quality sound that has made the EW Series an industry standard for videographers, journalists, and content creators all over the world.

Sennheiser EW100 G2 Wireless Mic Kit

The Evolution G2 Series is a UHF wireless microphone system featuring 1440 tunable frequencies and 4 frequency presets. This system includes the EK100G2 camera mountable receiver, SK100G2 body-pack transmitter and ME2 omnidirectional lavalier microphone.

The EK100G2 receiver is made of a durable metal enclosure and features a full functional LED display. The receiver features a 1/8″ unbalanced TRS mini output for quick connection to camcorders. The receiver features 4 preset memory locations that can be reassigned to any of the 1,440 available frequencies, within the 32MHz tuning range.

The SK100G2 body-pack transmitter features an identically designed enclosure as the receiver. It also features an LCD display and 4 preset memory locations that can be reassigned to any of the available 1,440 frequencies. The transmitter features an 1/8″ locking-mini input for compatible lavalier microphones.

The ME2 omni-directional lavalier microphone features a sensitivity and frequency response suitable for capturing in the most demanding environments.

FEATURES:
UHF Transmission
The Sennheiser Evolution series operates on UHF frequencies allowing longer range and few drop-outs and interference.

Flexible Frequency Options
The system is pre-configured with 4 preset channels, however the channels can be reconfigured with any of the available 1,440 frequencies within the 32MHz range.

Comprehensive Display
A comprehensive LED display provides channels and frequency information as well as battery life, usage time, signal status and more.

Rugged Metal Design
Both transmitter and receiver feature a rugged, metal enclosure designed to withstand the rigors of road use and the elements.

SENNHEISER MKH 8060 SHOTGUN MIC

The microphone exhibits a supercardioid polar pattern at low to midrange frequencies and transitions to a lobar pattern in high frequencies, providing uniform attenuation of 10 to 20 dB from 125 Hz to 1 kHz between 90° and 120° off axis. The rejection pattern for high frequencies is also consistent, further contributing to the mic’s transparent, undistorted off-axis tone. Your dialogue, foley, and sound effects can be recorded with full dynamics and clarity, thanks to the MKH 8060’s wide frequency response, transformerless output, and high SPL handling.

For Pro Film, TV & Location Recording

Moisture-Resistant for Humid Conditions

No Switches, Buttons, or Dials

50 Hz to 25 kHz Frequency Response

Supercardioid at Low & Mid Frequencies

Lobar Pattern at High Frequencies

Low 11 dBA Self-Noise

Ultrahigh Sensitivity of -24 dB

Transparent, Undistorted Off-Axis Tone

Windscreen Reduces Wind Noise

Smart watches wood edition

Himenaeos parturient nam a justo placerat lorem erat pretium a fusce pharetra pretium enim sagittis ut nunc neque torquent sem a leo.Dictumst himenaeos primis torquent ridiculus porttitor turpis.

Smoque

The Smoque Filter is a unique diffusion filter that provides a smoky, hazy quality to your images, emulating the effects of a smoke or fog machine. This filter is ideal for use in situations where smoke could typically be encountered, but is not available or present.

Strengths Available: 1.8/ 1.4/ 1.2/ 1/ 2

Sizes Available: 4×5.65/ 4×4/ 4 1/2″/ Series 9/ 138mm

Soft Edge Graduated ND Filter

A graduated neutral density filter that helps to specifically darken skies and other bright areas of the image. The filter is densest at the edge and tapers to clear by the middle, with a soft-edged line of transition between the density and clear areas. Neutral density filters do not affect the coloration of the image and the 0.3 density provides a 1 stop reduction in light from entering the lens.

Specs

Strengths Available: .3/ .6/ .9/ 1.2/ 1.3/ 1.4/ 1.5

Soft Fx

The Soft/FX Filter can be applied to purposely reduce the appearance of blemishes and wrinkles in portraits or to apply a general soft-focus effect while maintaining overall sharpness. An array of small lenses distributed within the surface of this filter smooths fine lines and textures, which can be useful for creating a more flattering result of a subject.

Strengths Available: 1.8/ 1/ 2/ 3/ 4/ 5 

Sizes Available: 4×5.65/ Series 9/ 138mm/ 6.6×6.6/ 4×4

 

Sony ECM-XM1 Onboard Mic

With an ultra lightweight body and smooth tone, the Sony ECM-VG1 shotgun microphone offers strong, clean output signal for event video shoots, indie film production, TV and documentary shooting, court room depositions, and more. Plus, at a mere 2.3 ounces, it can be placed atop a camcorder or mounted on a boompole with virtually no impact on the weight of the rig.

SPECS:
Form Factor – Stand/Boom Mount
Intended Sound Sources – Vocals, Room Ambiance
Sound Field – Mono
Element Type – 1 x Electret Condenser
Polar Pattern – Supercardioid

Frequency Range – 40 Hz to 20 kHz
Maximum SPL – 127 dB SPL (1 kHz, 1% THD)
Off-Axis Rejection – >3 dB at 60°/ >15 dB at 120°/ 20 dB at 180°
Sensitivity – -33 dBV/Pa at 1 kHz
Dynamic Range – 109 dB
Signal-to-Noise Ratio – 76 dB A-Weighted (1 kHz)

Power Sources – Phantom Power
Operating Voltage – 40 to 52 V (Phantom Power)

Straw

The Straw Solid Color Filter adds a warm, golden yellowish coloration across the entire image and helps to subdue overly bluish casts. The solid color design makes this filter well-suited to pairing with other filters for further control over the appearance of imagery. The 1 color density provides less straw coloration than the 2 density filter.

Strengths Available: 1.8/ 1.4/ 1.2/ 1/ 2

Sizes Available: 4×5.65/ 4×4/ 4 1/2″/ Series 9/ 138mm

Tentacle Sync E MKII Timecode Generator with Bluetooth 5.0

The Tentacle Sync E mkII Timecode Generator dual set pairs two lightweight, super-compact Sync E mk2 timecode generators with two downloadable Tentacle Sync Studio software licenses (macOS). These updates to the Tentacle Sync E feature Bluetooth 5.0 setup and battery management improvements. Designed for vlogging, events, multicamera setups, and post-syncing, the Sync E MKII can generate any SMPTE timecode or jam-sync to an external timecode source.

Teradek Bolt 10K Wireless Receiver

Teradek Bolt 10K is an ultra high-performance, zero-delay video transport device that receives
audio/video at up to 10,000 ft. of range with zero perceptible delays. The receiver includes an
integrated panel array, Gold-Mount battery plates and a ⅜” mounting point.

Bolt 10K receivers support 1080p60 4:2:2 video and are compatible with Bolt 3000 transmitter
units. Newly-designed chassis, hassle-free Tx/Rx pairing, robust range and visually lossless HD
quality video make this our strongest unit we’ve ever built.

Complete Bolt Set with Protective Utility Case
Wirelessly transmit visually lossless 1080p60

Video/Audio up to 10,000 ft (3048 meters) with imperceptible latency

Perfect for car chase and aerial/drone shoots

Full integrated with panel antenna

Rapid Reconnect & Real-Time Frequency Adjustment

Multicast up to 4 Receivers

Support camera metadata, timecode, and start/stop flags

Tobacco

The Tobacco Solid Color Filter adds a warm, brownish-yellow coloration across the entire image and helps to subdue overly bluish casts. The solid color design makes this filter well-suited to pairing with other filters for further control over the appearance of imagery. The 1 color density provides less tobacco coloration than the 2 density filter.

Strengths Available: 1/ 2/ 3

Sizes Available: 4×5.65/ 4×4/ 4 1/2″/ Series 9/ 138mm