ARRI LMB 4X5 CLIP ON
The LMB 4 x 5″ 3-Stage Clamp-On Set from ARRI includes the lightweight LMB 4 x 5″ matte box, one 2-filter stage, one 1-filter stage, three 4 x 5.65″ / 4 x 4″ combo filter trays, and one top/bottom flag. The modular LMB 4 x 5″ matte box can be pared down to a single-filter configuration, suiting it for gimbal, drone, or stabilizer shots.
LENS CLAMPS AVAILABLE: 80MM/ 85MM/ 87MM/ 95MM/ 100MM/ 104MM/ 110MM/ 114MM/ 125MM/ 134MM/ 136MM/ 143MM/ 156MM/ 162MM
NOTE: PLEASE INQUIRE YOUR LENS CLAMP SIZE
ARRI LMB-25 4X5.65 CLIP ON
The basic LMB-25 to LMB 4×5 Matte Box Upgrade Set from ARRI enables you to update your existing LMB-25 matte box on the newer modular LMB 4×5 platform. This set comprises an LMB 4×5 backplate with filter guides, two LMB flag holders, and a foam case insert that holds each matte box component.
LENS CLAMPS AVAILABLE: 80MM/ 85MM/ 87MM/ 95MM/ 100MM/ 104MM/ 110MM/ 114MM/ 125MM/ 134MM/ 136MM/ 143MM/ 156MM/ 162MM
NOTE: PLEASE INQUIRE YOUR LENS CLAMP SIZE
ARRI LMB-4A 6.6X6.6 CLIP ON
ARRI LMB-4A Lightweight Matte Box includes two 6.6″ x 6.6″ push-through filter frames and attaches directly to the front diameter of the lens. The LBM-4A is specially designed for the Angenieux 24-290mm and Ultra 12 zoom ranges with a 162mm diameter front.
ARRI MB-14 6.6X6.6 STUDIO
The MB-14 is a production matte box designed for wide-angle and large diameter lenses. It slides onto 19mm rods, swings away for an easy lens change. Main Features Maximum filter size 6.6″ x 6.6″ / round 6″ Standard configuration with 4-filter stage; several other filter stages possible One of each filter frame pair toothed for operation by knob or flexible shaft Swing away 90° to the front Top / bottom and side flags Set of masks Wide carrier MB-14 for lenses from 9.8 mm Technical Specs Min. focal length 12 mm (9.8 mm with MB-14) Max. number of filters (with a 4 filter stage back): four 6.6 x 6.6 filters one 138mm or 6″ round filter Camera attachment for dia. 19 mm support rods Dimensions 372 x 260 x 155 mm (14.6 x 10.2 x 6.1 in) Weight approx. 2,450 g (5.4 lbs)
ARRI SMB-2 4X5.65 TILTING STUDIO
The SMB-2 Tilt Matte Box Module from ARRI is composed of a 4:3 sunshade, a tilting extension module, and an R2 ring–compatible back plate. A mounting arm is not included nor are any filter stages or tilting filter ring. The SMB-2 has a modular design, and is ready to accept stackable 4″ x 5.65″ filter stages, either the 19mm or 15mm rod mounting arm, and other separately available components as you wish. The SMB-2’s swing-away design provides easy access to your lens without having to slide the matte box off the rods.
BRIGHT TANGERINE MISFIT ATOM 4X5.65 CLIP ON
| Lens Compatibility | |
| Attachment Method | |
| Built-In Filter Slots | |
| Material | |
| Weight |