A new support system for use with hand held gimbal rigs like the DJI Ronin. A modified vest design with superior lower back support that allows the cameraman to carry weights further away from the body, plus a 9″ extended arm to position the gimbal rig in front of the shooter.

Belt Size – 33.5 to 43.3″ (85 to 110 cm)
Suspension Line Length – 56.3″ (143 cm) when fully stretched
Capacity – 9 lb (4 kg) in steps to 55 lb (25 kg)
Mounted Height – 39.4 – 43.3″ (100 – 110 cm)
Weight – 4.4 lb (2 kg) only vest/ 9.5 lb (4.3 kg) entire system with + 5″ (13 cm) arm

The Easyrig Mini Strong Camera Support supports from 9 to 13 lbs of camera weight, relieves the strain of that weight from your arms, and leaves you only with the job of maneuvering the camera in desired directions.

Load Capacity
9 – 13 lbs (4 – 6 kg)

Suspension Line Length
39″ when fully stretched (99 cm)

Max Waist Hip Strap Length
55″ (140 cm)

Dimensions
Mounted height: 37″ (94 cm)

Folded: 22 x 11 x 7.5″ (56 x 28 x 19 cm)

Weight
7.3 lbs (3.3 kg)

The latest addition to the Easyrig lineup, the range agile Vario 5. The Vario 5 is a flexible solution built to handle today’s popular light heavy camera rigs and gimbals. The all new Vario 5 is a body-worn support system capable of handling any load from 11-38 lbs (5-17kg).

The system works by using a suspension line to support the weight of the camera or gimbal rig, taking the load off of your shoulder, neck, and arm muscles, and distributing it across your torso. The tension line is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig.

Save your back with the Vario 5 Standard Cinema Flex Vest with Standard Top Bar from Easyrig. Using a suspension line to support a camera rig weighing 11 to 38 lb, this system takes the load off your shoulders, neck, and arm muscles and distributes it across your torso. This lets you shoot for longer periods of time without worrying about arm fatigue. The system consists of a Standard Cinema Flex vest, a Vario 5 shock absorber, and a standard top bar. Also included is a carrying bag for convenient storage and transport of the Easyrig system.

Load Capacity – 11 to 38 lb / 4.99 to 17.24 kg
Height – 40.55 to 44.49″ / 103 to 113 cm & 24.41″ / 62 cm (Folded)
Depth – 12.20″ / 31 cm & 8.66″ / 22 cm (Folded)
Weight – 7.72 lb / 3.5 kg
Counterweights – No
Vest Weight – 4.85 lb / 2.2 kg
Belt Size – 29 to 50″ / 73.66 to 127.00 cm
Suspension Line Length – 35″ / 88.90 cm

The Easyrig Vario 5 with Standard Gimbal Flex Vest and 5″ Extended Arm is a body-worn support system that is adjustable to support camera rigs weighing 11 to 38 lb. The system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles, and distributing it across your torso. The tension line is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig. The system consists of the standard Gimbal Flex vest, a Vario 5 standard support bar, and a 5″ extended support arm.

Load Capacity – 11 to 38 lb / 4.99 to 17.24 kg
Height – 22″ / 55.88 cm
Counterweights – No
Belt Size – 30 to 36″ / 76.20 to 91.44 cm
Suspension Line Length – 35″ / 88 cm

The Vario 5 Vest from Easyrig is a support system built to handle camera rigs and gimbals with a load between 11 – 38 lb and has a 5″ extension arm. With an adjustment screw located on the back, the Vario 5 allows you to adjust the line tension to adapt to many different cameras and configurations. The vest allows you to deliver the same steady hand-held shots, while relieving strain on your back, neck, and shoulders. The load is redistributed to the hips, allowing you to shoot hand-held in comfort for long periods of time.

The Flowcine Serene is a two axis spring arm that attaches at the end of the Easyrig arm to stabilize Y-Axis movement. It comes pre-installed in this configuration, and mitigates vertical vibrations induced by walking or running during a tracking shot. It also stabilizes side to side motion in similar tracking situations by counter-pivoting around its center axis.

The Vario 5 Gimbal Vest from Easyrig is a support system built to handle gimbal rigs with a load between 11 – 38 lb and has a 5″ extended arm to get the rig out in front of you. With an adjustment screw located on the back, the Vario 5 allows you to adjust the line tension to adapt to many different cameras and configurations. The vest allows you to deliver the same steady hand-held shots, while relieving strain on your back, neck, and shoulders. The load is redistributed to the hips, allowing you to shoot with you gimbal rig in comfort for long periods of time.

An adjustable, body-worn support system for camera rigs weighing 11 to 38 lb. This system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles and distributing it across your torso.

This system consists of the standard-size Gimbal Rig vest with the EASYLOCK ratcheting buckle, a standard top support bar for shoulder mounting, a quick release camera mount, and a STABIL G3 dampening arm to reduce walking motion in your footage.

Stabilizer Type
Vest System

Load Capacity
11 to 37.5 lb / 5 to 17 kg

Camera Mount
Quick Release

Additional Mount
1/4″-20 Female

Height

40.6 to 44.5″ / 103 to 113 cm

24.4″ / 62 cm

Depth

12.2″ / 31 cm

8.7″ / 22 cm (Folded)

Weight
12.1 lb / 5.5 kg

Counterweights
None

Vest Weight
5.3 lb / 2.4 kg

Belt Size
31 to 51″ / 78.7 to 129.5 cm

Suspension Line Length
35.4″ / 90 cm