Showing 16–30 of 42 resultsSorted by price: low to high
17″SMALL HD 1703 P3X Monitor
Bright, Full HD 17-inch Wide Color Gamut (P3) Reference Grade Monitor
The 17″ monitor that rivals OLED with Incredible color accuracy and daylight
viewability.
INPUT:
2x SDI, HDMI
OUTPUT:
2x SDI, HDMI
DISPLAY:
17-inch, 1920×1080, 900nits
SONY AXS-R7 External 4K Portable Memory Recorder
4K RAW / X-OCN recording at 120 fps* and cache recording speeds up 4K production
workflow
The durable, dust and splash-proof AXS-R7 Portable Memory Recorder attaches seamlessly to
the high end F55 and F5 CineAlta cameras, speeding up the 4K production workflow without
compromising quality. The AXS-R7 doubles 4K RAW recording from 60 fps up to 120 fps for the
F55 camera compared to previous Sony recorders. For shooting at higher frame rates, the
recorder captures 2K RAW at up to 240 fps for the F55 and F5, for playback with 10x super slow
motion. Working with high-speed AXSM™ A Series memory cards, the recorder features dual
memory card slots for extra security and to extend recording times. The recorder also offers 4K
RAW cache recordings up to 30 seconds while in standby mode. The tough, all-metal casing
makes the AXS-R7 the ideal companion to the F55 and F5 for all kinds of high-end drama,
documentary and wildlife productions.
In addition to AXS-R7 has new recording format, X-OCN. This new format support the high
quality workflows at moderate bitrate. The system retains everything the sensor sees, delivering
tonal gradation with 16-bit precision, ideal for High Dynamic Range (HDR) image grading and
other cutting-edge workflows that require higher than 10-bit or 12-bit precision.
Video Devices PIX-E5 5″ Monitor
Camera-mounted recording monitor featuring a 5”, Full HD LCD, precision monitoring tools, SDI
& HDMI input/output, and both 4K and Apple ProRes 4444 XQ edit-ready recording to
affordable mSATA-based SpeedDrives.
5” Full HD LCD
SDI & HDMI input/output
4K and Apple ProRes 4444 XQ recording
Teradek Cube 755
Teradek codecs can stream to any online video platform, including Facebook Live, YouTube
Live, Periscope, Twitch, and more. Go live on multiple platforms at the same time to increase
viewership and engagement with our Core platform
Teradek Bolt 10K Wireless Receiver
Teradek Bolt 10K is an ultra high-performance, zero-delay video transport device that receives
audio/video at up to 10,000 ft. of range with zero perceptible delays. The receiver includes an
integrated panel array, Gold-Mount battery plates and a ⅜” mounting point.
Bolt 10K receivers support 1080p60 4:2:2 video and are compatible with Bolt 3000 transmitter
units. Newly-designed chassis, hassle-free Tx/Rx pairing, robust range and visually lossless HD
quality video make this our strongest unit we’ve ever built.
Complete Bolt Set with Protective Utility Case
Wirelessly transmit visually lossless 1080p60
Video/Audio up to 10,000 ft (3048 meters) with imperceptible latency
Perfect for car chase and aerial/drone shoots
Full integrated with panel antenna
Rapid Reconnect & Real-Time Frequency Adjustment
Multicast up to 4 Receivers
Support camera metadata, timecode, and start/stop flags
24” SMALL HD CINE 4K HIGH BRIGHT PRO MONITOR
Cine 24 brings 4K, daylight-viewable monitoring everywhere. Lightweight for faster setup and
teardown, this monitor is the all-around solution as a director’s monitor or for production and
broadcast video villages. Cine 24 is SmallHD’s ultimate production workhorse.
DISPLAY:
Panel Type: IPS LCD
Diagonal Size: 24.1
Resolution: 3840×2160 Max Brightness: 1350nits Contrast: 1000:1 Gamut: 100% DCI-P3 Color Depth: 10-bit (8+2) Viewing Angle: 178 Degrees Backlight Type: EdgelitINPUT SIGNAL:
12G-SDI Input Types: 4x 12G-SDI
HDMI Input Types: 1x HDMI 2.0 (4K60)
OUTPUT SIGNAL:12G-SDI Output Types: 4x 12G-SDI
Audio Output Types: 1x 3.5mm 3-pin Stereo Headphone Jack
POWER:Input: 1x 3-pin XLR (210W max, 12V-34V, 18A max)
Output: 2x 2pin (12V / 2A combined), 1x USB-A (2.4A) (Front), 1x USB-A (1.5A) (Rear) 1x
USB-C (5V / 1.5A)
7″ SMALL HD 703 ULTRABRIGHT MONITOR
The SmallHD 703 UltraBright Monitor, with its 2200 cd/m² bright backlight, overcomes this
environmental difficulty. The 7″ 1920 x 1080 LCD provides a sharp image, ideal for focus pulling
and image analysis on set and in the field.
DISPLAY:
Panel Type
TFT LCD
Display Size 7.0″ / 17.8 cm
Resolution 1920 x 1080
Aspect Ratio 16:9
Viewing Angle
Horizontal: 178° (89/89)
Vertical: 178° (89/89)
Maximum Brightness
2200 cd/m2
Contrast Ratio
1200:1
Bit Depth / Color Support
10-Bit (1.07 Billion Colors)
Pixels Per Inch (ppi) 323 ppi
Color Gamut 70% NTSC
Image Controls
Blue Only, False Color, Focus Peaking, Image Flip, Pixel-to-Pixel Zoom, RGB Parade, Screen
Markers, Waveform
Video I/O
1 x BNC (3G-SDI) Output
1 x HDMI Output
1 x BNC (3G-SDI) Input
1 x HDMI Input
Embedded Audio
HDMI
SDI
Audio I/O
1 x 1/8″ / 3.5 mm Headphone Output
Built-In Speaker
None
Power I/O
1 x LEMO 2-Pin Input
1 x LEMO 2-Pin Output
Video Format SDI (10-Bit 4:2:2)
1080p: 23.98/24/25/29.97/30/
50/59.94/60
1080PsF: 23.98/24/25/29.97/30
1080i: 50/59.94/60
720p: 23.98/24/25/29.97/30/
50/59.94/60
480i
576i
HDMI (8/10/12-Bit)
1080p: 23.98/24/25/30/50/59.94/60
1080PsF: 23.98/24/25/30
1080i: 50/59.94/60
720p: 23.98/24/25/30/50/59.94/60/
100/119.88/120
576p: 50/100
480p: 59.94/60/119.88/120
480i: 59.94/60/119.88/120/239.76/240
576i: 50/100/200
POWER:
DC Input Power
6 to 34 VDC
Battery Type
None
Power Consumption
13 W
7″ SMALL HD CINE 7
Cine 7 is the ultimate 7” on-camera HD monitor for cinematographers, offering a color
accurate wide-gamut display, cinema camera control, and 4K and HDR compatibility. View your
production in full sunlight thanks to 1800 nits of brightness and save your favorite tools,
functions, and setting pages in one tap with PageOS 4.
The Full HD 7-inch IPS LCD display with 1920×1200 resolution ensures a clear look at your
production, while 10-bit color processing in 100% DCI-P3 offers color accuracy. This guarantees
the image on screen reflects what’s being captured by the camera. No matter the time of day,
environment, or sunlight, you’ll get a clear, glare-free view of your monitor thanks to 1800 nits
of brightness.
The Cine 7 features two 3G SDI inputs, with the second input doubling as a loop out, an
HDMI input with an HDMI loop through, and a Gold Mount battery plate attachment.
DISPLAY
Panel Type: IPS LCD Diagonal Size: 7.02 Resolution: 1920×1200 Pixel Density: 322 ppi Aspect Ratio: 16:9 Active Area: 5.95 x 3.72 Max Brightness: 1800 NITs Contrast: 1000:1 Gamut: 100% DCI-P3 Coverage Color Depth: 10-bit Processing (8-bit panel) Viewing Angle: 160 Backlight Type: LED Adjustable Backlight: YesCONNECTOR TYPE
SDI: 1x BNC 3G input and 1x BNC 3G selectable input/output HDMI: 1 input and 1 output: HDMI Type-A Receptacles (full size) Audio: 1x 3.5mm 3-pin Stereo Headphone Jack Power In: 2-pin Locking USB: 1x USB 2.0 Micro-B receptacleINPUT SIGNAL
3G-SDI Input Types: YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i120,1080i119.88, 1080i100 HD-SDI Input Types: YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24,
1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60,
1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24,
720p23.98 SD-SDI Input Types: YCC 4:2:2 @ 10-bits: 480i59.94, 576i50 HDMI Input Types: YCC 4:2:2 @ 12 bits, 8 bit color in RGB & YCC 4:4:4: 2160p30, 2160p29.97,
2160p25, 2160p24, 2160p23.98, 1080p120, 1080p119.88, 1080p100, 1080i120, 1080i119.88,
1080i100, 1080i60, 1080i59.94, 1080i50, 720p240, 720p239.76, 720p200 YCC 4:2:2 @ 12 bits,
8/10/12/16 bit color in RGB & YCC 4:4:4 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97
1080p25, 1080p24, 1080p23.98, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50,
720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p240, 480p239.76, 480p120, 480p119.88,
480p60, 480p59.94, 576p200, 576p100, 576p50, 480i240, 480i239.76, 480i120, 480i119.88,
480i60, 480i59.94, 576i200, 576i100, 576i50
OUTPUT SIGNAL
3G-SDI Output Types: YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i120,1080i119.88, 1080i100 HD-SDI Output Types: YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24,
1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60,
1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24,
720p23.98 SD-SDI Output Types: YCC 4:2:2 @ 10-bits: 480i59.94, 576i50 HDMI Output Types: YCC 4:2:2 @ 12 bits, 8 bit color in RGB & YCC 4:4:4: 2160p30, 2160p29.97,
2160p25, 2160p24, 2160p23.98, 1080p120, 1080p119.88, 1080p100, 1080i120, 1080i119.88,
1080i100, 1080i60, 1080i59.94, 1080i50, 720p240, 720p239.76, 720p200 YCC 4:2:2 @ 12 bits,
8/10/12/16 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97
1080p25, 1080p24, 1080p23.98, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50,
720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p240, 480p239.76, 480p120, 480p119.88,
480p60, 480p59.94, 576p200, 576p100, 576p50, 480i240, 480i239.76, 480i120, 480i119.88,
480i60, 480i59.94, 576i200, 576i100, 576i50
7″ SMALL HD CINE 7 BOLT
7″ Cine 7 On-Camera Monitor Kit with Bolt 4K Receiver from SmallHD provides
professional monitoring in a sharp 7″ display suitable for outdoor use. The Cine 7 supports up to
UHD 4K HDMI output as well as various HD and SD formats via one full-size HDMI input, one
HDMI output, one 3G-SDI input, and one 3G-SDI selectable input/output.
The monitor also supports cross conversion from HDMI to SDI and from SDI to HDMI. The
Bolt 4K module attaches to the back of the Cine 7 and can receive up to 4K30 video from up to
750′ away. Both the monitor and wireless module are powered with a Gold mount battery plate
that can also power the monitor with a separately available, high-capacity Gold mount
battery.
DISPLAY:
Antenna Ports
5 x RP-SMA Female
Embedded Audio
SDI: 2-Channel
HDMI: 2-Channel
Encryption
256-Bit AES
Audio Format
2-Channel 24-Bit 48 kHz LPCM Audio
Wireless Video Compression
Uncompressed
Timecode Support
Yes
Wireless Range
750′ / 228.6 m (Line-of-Sight)
# of Channels
13 (40 MHz)
25 (20 MHz)
Channel Bandwidth
40 MHz, 20 MHz
Frequency Range
Non-DFS Frequencies
US: 5.19 to 5.23 GHz
US: 5.75 to 5.79 GHz
DFS Frequencies
US: 5.27 to 5.67 GHz
Power
Gold Mount
TERADEK BOLT 4K LT 750 WIRLESS TX/ RX
The Bolt 4K LT 750 4K TX/RX is a real time wireless video transmission system that supports
video signals up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no
image delay. Key features include increased range, faster reconnection times, easier setup with
Bluetooth App for iOS or Android, and more stable connectivity. These devices are
cross-compatible with the entire Bolt 4K Family.
TRANSMITTER:
Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)
Output: 1x 3G-SDI (up to 1080p60)
RECIEVER:Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)
TRUE HDR:
Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera
signals with wide dynamic range in order to monitor and achieve balanced highlight and
lowlight regions with accurate color reproduction.
LINK:
Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.
WEIGHT:
TX Mounting: M3 / ¼”-20
RX Mounting: M3 / ¼”-20 / ⅜”x16
COMPADABILITY:Send and receive signals between any Bolt 4K series of devices for expanding workflow
requirements.
CAMERA METADATA:
Transmit metadata, timecode, and start/stop flags from most camera manufacturers
TERADEK BOLT 4K 750 WIRLESS TX/ RX
The Bolt 4K 750 TX/RX Set is a real-time wireless video transmission system that supports 1080p
and 2160p video signals at 60FPS with less than 1ms of delay at up to 750 feet. Key features
include increased range, faster reconnection times, easier setup with Bluetooth App for iOS or
Android, and more stable connectivity. These devices are cross-compatible with the entire Bolt
4K Family. Includes integrated 1/4″x20 and M3 mounting points.
Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.
Receiver: 2x 12G-SDI, 1x HDMI 2.0
DECIMATOR MD-QUAD
The Decimator MD-QUAD (3G/HD/SD)SDI Quad Split with (3G/HD/SD)-SDI and HDMI
Outputs is a low cost, miniature SDI Quad-Splitter with SDI and HDMI Outputs.
With
four independent SDI inputs, you can now monitor your camera feeds without the hassle of
ensuring all inputs are the same SDI standard. Decimator MD-QUAD (3G/HD/SD)SDI Quad Split
with (3G/HD/SD)-SDI and HDMI Outputs.
Video Formats
3G:SMPTE 424M at 2.97 and 2.967Gb/s
1080p at 60/59.94/50Hz
HD:SMPTE 292M/274M/296M at 1.485 and 1.435Gb/s
1080i at 60/59.94/50Hz
1080p/psf at 30/29.97/25/24/23.98Hz
720p at 60/59.94/50/30/29.97/25/24/23.98Hz
SD:SMPTE 259M 270Mb/s
625i50
525i59.94
Inputs
Input Equalization > 100M using Belden 1694A
USB for control and updates
GPI on RJ-45
Led Status
Power
4x Signal lock and rate
Power
5V to +24V DC, 8 Watts
I38Positive Centre Pin
Menu Options
Input status for all 4 inputs
Output format
Output selection of Quad Split or input 1, 2, 3 or 4
Output aspect and type of 16:9 or 4:3 at either 90 or 100% of screen size
Individual aspect format for each input of Same as output, Letter-box or Pillar-box
Border Enable
Quad split mode reference of either Free-run or input 1
Enables for On-Screen Overlays
Basic Audio Meter control
Outputs
1 x 10-bit (3G/HD/SD)-SDI Re-clocked
HDMI
Dimensions
90 x 94 x 23mm / 3.54 x 3.70 x 0.9″
AJA UDC Converter
A broadcast quality Up/Down/Cross Mini-Converter which can convert between SD, HD,
and 3G video formats. Using the same AJA industry leading conversion technology as in our
model FS2, the UDC provides very high quality conversions in a cost-effective package.
I/Os include SD/HD/3G SDI Input and Output, HDMI output, and 2-channel RCA style audio
output. The UDC can be controlled by local dipswitches with additional control available via USB
and AJA’s MiniConfig application. A Reference Input allows the UDC to be locked to a local
reference.
SDI Input & Output
1 x SD/HD/3G-SDI input (auto-selected), SMPTE-292/296/424 (BNC connector)
1 x SD/HD/3G-SDI output, SMPTE-292/296/424 (BNC connector)
Formats
525i59.94, 625i50
1080i 50/59.94
720p 23.98/24/25/29.97/30/50/59.94/60
1080p 23.98/24/25/29.97/30/59.94/60
1080psf 23.98/24/25/29.97/30
Reference Input
Color Black
Tri-Level sync
HDMI Output
10-bit HDMI v1.4a
Audio I/O
16-channel embedded SDI audio input
16-channel embedded SDI audio output
8-channel HDMI audio output
2 RCA-style analog outputs at -10dBV (nominal)
HDCP
The UDC does not encode the HDMI output with
HDCP encryption. By definition, HD-SDI inputs to the UDC are unencrypted. The HDMI
specification requires HDMI monitors to support unencrypted inputs
User Controls
USB port used with supplied cable and MiniConfig
software application to configure device via PC/Mac
Power
5 VDC regulated, 3 W
Dimensions
5.8 x 3.1 x 1″ (147 x 79 x 25 mm)
INOGENI USB 3.0 SDI Video Capture Card
Easy and reliable tool to capture uncompressed SDI video with embedded audio for
your PC for recording, editing, videoconferencing and streaming applications.
No driver installation is necessary and it will work on all motherboards and USB 3.0
chipsets. It features a 3GSDI input with active loop output and supports SD and HDTV video
formats, up to 1080p60.
Compact in size and powered directly from a USB 3.0 port, the converter is a practical and
easy-to-use USB 3.0 capture solution. It is compatible with Windows, Mac OSX, Linux and
Android operating systems and is UVC-compliant, so it will work with all DirectShow compatible
software.
The converter supports 1080p resolutions up to 60 fps. All SD and HD resolution signals are
converted to 4:2:2 8-bit color space over USB 3.0. The embedded audio in your SDI signal is
extracted and output as two-channel LPCM. A USB 3.0 cable comes included.
Input: Connector
1 x BNC(3GSDI input), 1 x BNC (3GSDI active loop
out)
Input: Video Resolutions
1080p59.94/60 /50 (SMPTE 425M Level A/B),
1080i(SMPTE 274M), 720p(SMPTE 296M), SD(SMPTE 259C)
Input: Jitter(alignment)
HD/SD: <0.2UI
3Gb/s: <0.4UI
Input: Cable length
150m / 492.12′ at 1.485 Gb/s
120m / 393.70′ at 2.970 Gb/s
Input: Frame Rates
60, 50, 30, 29.97, 25, 24, 23.98 Hz
Input: Color
Space4:2:2
Input: Sampling Rate
148.5/148.35 MHz
Input: Embedded Audio
Ch 1&2 48kHz LPCM
Output: Connector
1 x USB 3.0
Output: Color
SpaceYCbCr (YUY2) 4:2:2 8-bit
Output: Video Scaler
Automatic hardware based
Output: Color Space
ConversionAutomatic hardware based
Output: Sampling
ConversionAutomatic hardware based
Output: Frame Rate
ConversionAutomatic hardware based
Output: Audio
2-channel LPCM audio 48 kHz from SDI
Compatibility: Operating System
NO driver installation necessary.
Windows 7/8/8.1(32/64-bit) OSX (10.10 and above) Linux (kernel v2.6.38 and above)
Android
Compatibility: Host Requirements USB 3.0 port
Compatibility: Motherboard
Compatible with all motherboards Intel, Renesas,
ASMedia and Fresco Logic
Compatibility: Cameras Supported
Cameras and camcorders with an HDMI
output
Software Compatibility
UVC-compliant Runs with all software compatible to
DirectShow, V4L2, QuickTime and AVFoundation.
USB 3Power
5V, 530 mA
Dimensions
3.2 x 2.9 x 0.75″ / 8.13 x 7.37 x 1.91cm
Weight
139g / 4.90oz
AJA HD10MD3
A miniature solution for converting HD-SDI video to SD-SDI and to component and
composite video, using a full 10-bit data path and multi-point interpolation to produce
broadcast quality downconverted video.
The SDI output supports 4-channel embedded audio from the HD-SDI input. The device also
converts 1080p24 or 1080p24sf to 59.94 Hz output video using the standard 3:2 pulldown
technique. The output can be formatted for either 4:3 or 16:9 SD monitors. All conversion is
done by external dipswitch selection.
Formats
1080i 50/59.94/60 Hz
1080p/psf 23.98/24/25/29.97/30 Hz
720p 50/59.94/60 Hz
Inputs
1x HD-SDI/SDI dual-rate, SMPTE 292/296
Outputs
1x SD-SDI, SMPTE, 259M
2x HD-SDI 1x YPbPr on BNC (SMPTE, EBU-N10, Betacam)
1x RGB on BNC
1x YC (S-Video) on BNC
NTSC, PAL
Downconversion
Multi-point interpolation, 10-bit processing 3:2 conversion for
23.98/24p/psf inputs
User Controls
External dipswitch
Input video format
Output video format
4:3 Safe-zone graticule overlay
Pedestal output
4:3 / 16:9 Monitor select
Power
+5-18 V DC, regulated, 4 watts
Included power supply:
100-240v, 50/60Hz universal input
+5V DC regulated output
7.5 watt capacity
Dimensions
5.8 x 3.1 x 1″ (14.7 x 8 x 2.5 cm)