Super compact and rugged, the Micro Converter HDMI to SDI 3G from Blackmagic
Design enables you to link HDMI cameras or computers to pro-style SDI (BNC) monitors or
components.

You can also use several units to extend HDMI over long distances using SDI cable. This
compact converter has one HDMI input and two 3G-SD/HD/SDI outputs that can be set to Level
A or B. It auto-detects and matches your HDMI input to the SDI output and is compatible with
input/output resolutions up to 1080p60.

The Micro Converter HDMI to SDI 3G features HDMI timecode support, SDI re-clocking for
stability over long cable runs, and support for a wide range of pro broadcast resolutions
including cine-style 48 fps.

Video Inputs
1 x HDMI (2.0)

Audio Inputs
None

Video Outputs
2 x BNC (3G-SDI)

Audio Outputs
None

Other I/O
1 x USB-C Input

Expansion Slots
None

Input Video Format

HDMI (8/10-Bit 4:2:2 RGB, YUV)

1080p at 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps

1080i 50/59.94/60 fps

720p 50/59.94/60 fps

480i / 525 lines 29.97 fps

576i / 625 lines 25 fps

Output Video Format

SDI (8/10-Bit 4:2:2 RGB, YUV)

DCI 2K at 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps

DCI 2KPsF 25/29.97/30 fps

1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps

1080PsF 25/29.97/30 fps

1080i 50/59.94/60 fps

720p 50/59.94/60 fps

480i / 525 lines 29.97 fps

576i / 625 lines 25 fps

Embedded Audio
HDMI/SDI

Video Standard Compliance
SMPTE
259M/292M/296M/424M/425M

HDCP Support
Yes, Version 2.2

Power I/O
1 x USB-C (4.4 to 5.2 VDC) Input

Power Consumption
2 W

The Mini Converter Analog to SDI from Blackmagic will accept an HD/SD component,
NTSC, PAL, or S-video signal and convert it to an SDI output. You can also choose to embed SDI
audio from balanced AES/EBU or analog audio inputs.

Use this device to convert video from Betacam SP, VHS, set-top boxes, HDV cameras, and
other similar devices.

Input

(1) component, NTSC, PAL, and S-video via 3x BNCs

Output

(2) SDI (switchable between SD, HD & 3Gbs SDI)

Audio

Analog:

(2) channels of professional balanced analog with standard 1/4″ jack connections

Digital:

(2) channels of professional balanced digital with standard 1/4″ jack connections, AES/EBU
standard
(Audio inputs are shared)

Power
12VDC

The AJA GEN10 HD/SD/AES Sync Generator with Universal Power Supply is a very cost
effective sync generator, providing multi-format tri-level sync, color black sync, 75% color bar
sync, and AES tone or silence sync.

GEN10 supports up to 1080p/30 NTSC or 1080p/25 PAL and features seven outputs. One is
an AES-11 that switches between silence and tone. The remaining six are two groups of
independently controlled sync outputs — one group SD, one HD.

The SD outputs can be switched between color black or 75% color bars; and the HD outputs
feature tri-level sync and can be switched between 19 different HD formats. All outputs are in
sync with each-other and are sourced from an accurate master timebase.

Sync

HD: tri-level

SD: color black, 75% color bars

Outputs

AES-11:

1x BNC, 48 KHz, silent or 1 KHz tone

(-20 dBFS for NTSC, -18 dBFS for PAL)

Video:

Assignable in two groups to either HD or SD —

4x BNCs – outputs 1 to 4

2x BNCs – outputs 5 and 6

Accuracy
3 ppm

Formats

1080p23.98/24/25/29.97/30

1080psF23.98/24/25/29.97/30

1080i50/59.94/60

720p23.98/24/25/29.97/30/50/59.94/60

525i, 625i

User Controls
External dipswitch

Power
5-18 V DC, 2 W

Dimensions
5.8 x 3.1 x 1″ (14.7 x 7.9 x 2.5 cm)

Converts HD/SD-SDI over single mode 1310 nm fiber-optic cable (ST-style fiber
connector) to HDMI for driving HDMI monitors.

Embedded 8-channel HD/SD-SDI audio is supported in the HDMI output allowing a
convenient single cable audio/video connection.

The Hi5 provides 2-channel RCA style audio outputs for separate audio monitoring if
needed. A 3.28′ HDMI cable comes included, along with a universal power supply that comes
with international plug connectors for use around the world.

Inputs
Fiber-optic ST connector supporting SMPTE-259/292/296
HD/SD-SDI

Input Formats

525i

625i

720p 50/59.94/60

1080i 50/59.94/60

1080p 23.98/24/25/39.97/30

Outputs
HDMI with embedded audio

2-channel (L/R) RCA audio

Power
5 VDC regulated, 3 W

Dimensions
4.6 x 2.4 x 1″ (117 x 61 x 25 mm)

A 10-bit conversion of component or composite analog video to SDI at either SD or HD
resolutions. It utilizes a full 10-bit data path and 2x oversampling to ensure a high-quality
conversion.

Its low power consumption and a compact size, makes it suitable for use on set or in AV
installations that integrate different signal types.

The V2Digital supports NTSC, PAL, 720p at 50/59.94/60 Hz, 1080i at 50/59.94/60 Hz, and
1080psf at 23.98/24/25 Hz. The converter accepts YPbPr (SMPTE, EBU-N10), Betacam, or RGB
component inputs, and NTSC/PAL or S-Video composite inputs.

A 4-line Adaptive Comb Filter provides high-quality decoding of composite sources. The
comb filter can be switched to 2-line or notch modes for minimum delay requirements.

Formats

1080psf 23.98/24/25 Hz

1080i 50/59.94/60 Hz

720p 50/59.94/60 Hz

525i/625i 50/59.94/60 Hz

Inputs

BNC:

HD component YPbPr, RGB (SMPTE-274)

SD component (Betacam, EBU-N10), composite, YC (S-Video)

Output

1 x BNC, HD/SD-SDI (SMPTE-259/292/296M)

1 x USB 2.0 (for connection to Mac or PC)

Dip Switches

Control (Local/Remote)

Component/Composite (SD oOnly)

Format (YPbPr/YC or RGB)

Pedestal Present (on/off) (SD only)

Power
5 to 20 VDC, 3 watts

Dimensions
5.1 x 2.4 x 1.0″ (13.0 x 6.1 x 2.5 cm)

Weight
Not specified by manufacturer

The AJA Hi5-Plus 3G-SDI to HDMI Mini-Converter allows you to output an SDI signal to an
HDMI monitor.

When used with a compatible HDMI monitor, it outputs a 30-bit Deep Color RGB signal,
providing the full range of color available on a 3G/HD-SDI signal.

Video Input
3G-SDI with embedded audio

Input Formats

525i, 625i

720p 50, 59.94, 60

1080i 50, 59.94, 60

1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60

1080PsF 23.98, 24, 25, 29.97, 30 (converts to progressive)

2K x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60

2K x 1080PsF 23.98, 24, 25, 29.97, 30 (converts to progressive)

Video Outputs
HDMI with embedded audio up to 8 channels (selectable by
MiniConfig software)

8-bit RGB 4:4:4

10-bit YCbCr 4:2:2

12-bit

Audio Input
SDI embedded audio, select 8 of 16 channels and pass to the HDMI
output

Audio Output
2-channel RCA-style (-10 dBV nominal)

Power

Uses AJA Power Supply model DWP-U-R1 (included)

100-240 V, 50/60 Hz universal input

+5 V DC regulated, 7.5 W capacity

Dimensions
4.6 x 2.4 x 1″ (11.7 x 6.1 x 2.5 cm)

Easy and reliable tool to capture uncompressed SDI video with embedded audio for
your PC for recording, editing, videoconferencing and streaming applications.

No driver installation is necessary and it will work on all motherboards and USB 3.0
chipsets. It features a 3GSDI input with active loop output and supports SD and HDTV video
formats, up to 1080p60.

Compact in size and powered directly from a USB 3.0 port, the converter is a practical and
easy-to-use USB 3.0 capture solution. It is compatible with Windows, Mac OSX, Linux and
Android operating systems and is UVC-compliant, so it will work with all DirectShow compatible
software.

The converter supports 1080p resolutions up to 60 fps. All SD and HD resolution signals are
converted to 4:2:2 8-bit color space over USB 3.0. The embedded audio in your SDI signal is
extracted and output as two-channel LPCM. A USB 3.0 cable comes included.

Input: Connector
1 x BNC(3GSDI input), 1 x BNC (3GSDI active loop
out)

Input: Video Resolutions
1080p59.94/60 /50 (SMPTE 425M Level A/B),
1080i(SMPTE 274M), 720p(SMPTE 296M), SD(SMPTE 259C)

Input: Jitter(alignment)
HD/SD: <0.2UI
3Gb/s: <0.4UI

Input: Cable length

150m / 492.12′ at 1.485 Gb/s

120m / 393.70′ at 2.970 Gb/s

Input: Frame Rates
60, 50, 30, 29.97, 25, 24, 23.98 Hz

Input: Color
Space4:2:2

Input: Sampling Rate
148.5/148.35 MHz

Input: Embedded Audio
Ch 1&2 48kHz LPCM

Output: Connector
1 x USB 3.0

Output: Color
SpaceYCbCr (YUY2) 4:2:2 8-bit

Output: Video Scaler
Automatic hardware based

Output: Color Space
ConversionAutomatic hardware based

Output: Sampling
ConversionAutomatic hardware based

Output: Frame Rate
ConversionAutomatic hardware based

Output: Audio
2-channel LPCM audio 48 kHz from SDI

Compatibility: Operating System

NO driver installation necessary.

Windows 7/8/8.1(32/64-bit) OSX (10.10 and above) Linux (kernel v2.6.38 and above)
Android

Compatibility: Host Requirements USB 3.0 port

Compatibility: Motherboard
Compatible with all motherboards Intel, Renesas,
ASMedia and Fresco Logic

Compatibility: Cameras Supported
Cameras and camcorders with an HDMI
output

Software Compatibility
UVC-compliant Runs with all software compatible to
DirectShow, V4L2, QuickTime and AVFoundation.

USB 3Power
5V, 530 mA

Dimensions
3.2 x 2.9 x 0.75″ / 8.13 x 7.37 x 1.91cm

Weight
139g / 4.90oz

A broadcast quality Up/Down/Cross Mini-Converter which can convert between SD, HD,
and 3G video formats. Using the same AJA industry leading conversion technology as in our
model FS2, the UDC provides very high quality conversions in a cost-effective package.

I/Os include SD/HD/3G SDI Input and Output, HDMI output, and 2-channel RCA style audio
output. The UDC can be controlled by local dipswitches with additional control available via USB
and AJA’s MiniConfig application. A Reference Input allows the UDC to be locked to a local
reference.

SDI Input & Output

1 x SD/HD/3G-SDI input (auto-selected), SMPTE-292/296/424 (BNC connector)

1 x SD/HD/3G-SDI output, SMPTE-292/296/424 (BNC connector)

Formats
525i59.94, 625i50

1080i 50/59.94

720p 23.98/24/25/29.97/30/50/59.94/60

1080p 23.98/24/25/29.97/30/59.94/60

1080psf 23.98/24/25/29.97/30

Reference Input

Color Black

Tri-Level sync

HDMI Output
10-bit HDMI v1.4a

Audio I/O

16-channel embedded SDI audio input

16-channel embedded SDI audio output

8-channel HDMI audio output

2 RCA-style analog outputs at -10dBV (nominal)

HDCP

The UDC does not encode the HDMI output with
HDCP encryption. By definition, HD-SDI inputs to the UDC are unencrypted. The HDMI
specification requires HDMI monitors to support unencrypted inputs

User Controls
USB port used with supplied cable and MiniConfig
software application to configure device via PC/Mac

Power
5 VDC regulated, 3 W

Dimensions
5.8 x 3.1 x 1″ (147 x 79 x 25 mm)